Model #79071342706 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

LP to Natural Gas conversion 79071342706 Kenmore Gas range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there are items needed for the range.
 
Glad to help out.   Im  looking at your Kenmore Range model number 79071342706.

To get this back to natural gas, you will need to change the ignitor with orifice assembly.   There is also an adjustment in the oven that needs to be made but that is done by a qualified Gas technician.   Sorry only a certified gas man should do that.   Here are the parts you need for your upper burners though to go back to natural gas.

You'll need 1 of each of these items below.

Left rear ignitor/orifice for model 
79071342706 #316237704 

Left front 
 ignitor/orifice for model 79071342706 #316237805 

Right rear 
 ignitor/orifice for model 79071342706 #316237707 

Right front 
 ignitor/orifice for model 79071342706 #316237801


 SAFETY WARNING: Gas conversions should only be completed by a qualified technician. If not completed properly, the process could result in dangerous gas leaks that could cause property damage, serious injury or death. 
 
Sears does not provide gas conversion services. I recommend you contact your gas company. If they do not provide gas conversion services, they may be able to help you locate a qualified technician in your local area. 

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 

Read More
Larry L -
Sears Technician
June 03, 2014
A:

Are there any parts needed for the burners in the oven for the LP to natural gas switch?

Read More
Adam -
June 04, 2014
A:

Also, does the whole ignitor assembly need to be replaced, or just the orifice?

Read More
Adam -
June 04, 2014
See more answers
Q:

Lost all power 79071342706 Kenmore Gas range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the range.

Glad to help out.   Im  looking at your Kenmore model number 790.71342706.

Very strange and do apologize.   You have changed the control board and still had the same problem.   Was the power outage only affect the range?   Did you try to put the range on a different fuse in the breaker system to see if it may be the main fuse?

For power supply too you need to check your power cord from the wall inlet to the range.  Were there any bare wires that you could see when you installed the new board?

Sorry but there is no main fuse.  The control board is what runs the power. 

I would look first at the power cord and make sure it looks good.  I would check the wiring of the power cord where it is hooked to the back of the range.   Then check your fuse system.

 

If you have further questions please let me know.Thanks for choosing Sears PartsDirect.com

 

Read More
Larry L -
Sears Technician
October 22, 2013
Q:

Burner won't light 79071342706 Kenmore Gas range

A:

Thanks for the inquiry and for using SearsPartsDirect.com. I am sorry to hear of the issue you are experiencing with the knob and the ignition of the burner. 

I suspect based upon your details that the burner valve/switch behind the knob is in need of replacement. If the valve doesn't secure the knob by having to push the knob in slightly to turn it on, that sounds like an issue with the valve. The same holds true for the positioning of the burner ignition spark.

I would recommend to pull the valve from the unit and take a close examination of it. It may need replacing. The valves for the surface burners will vary based upon the burner it controls. For convenience, I have included a blue link below that you may click on to be directed to the PartsDirect page to view the available valves for the burners so that you can select the right one if needed.

SearsPartsDirect Parts Breakdown for Valves 79071342706

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service. 

Let me know if I can be of further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
October 08, 2013

Top Parts