Model #79071319700 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

F10 error on this model 79071319700 Kenmore Gas range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is the F 10 code of the gas range.
 
Glad to help out.   Im  looking at your Kenmore Gas Range model number 79071319700.

F 10:

LIKELY FAILURE CONDITION/CAUSE:
RUNAWAY TEMPERATURE.

Suggested corrections.

1.   Check the sensor probe and replace if necessary.
2.  If oven is overheating, disconnect power.
3.  If oven continues to overheat when the power is reapplied, replace control board. 
4.  Severe overheating may require oven to be replaced should damage be extensive.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.

Read More
Larry L -
Sears Technician
April 21, 2014
Q:

how do you adjust the oven regulator to go from propane to natural gas. kenmore gas stove mdl#790.71319700

A:

When making major adjustments on your range especially when your are working with gas to be safe and I will be happy to help. While you are waiting for an expert answer, I did manage to find a link that will provide you with some good information to help you with your project. I hope my link is useful.

Read More
Joseph P. -
March 23, 2011
A:

i ordered the orifices that fit the burners and have already changed those but the oven does not show an orifice so thats what makes me believe it is an adjustment on the pressure regulator for the oven

Read More
Don -
March 23, 2011
A:

NOTE: The conversion of this range to LP gas should be completed by a qualified installer.

The 4 images below show how to convert your specific model of range to LP gas. These instructions are similar to the ones provided in the link for a previous answer posted by Joseph P. in the above response. According to your details, you have already replaced the orifices in the stove top burners. You won't need that part of the instructions provided below unless you want to recheck that conversion. You will need to convert the pressure regulator on the range. The orifice spud on the oven burner will also need to be screwed down to the LP position as shown in the procedure below. The burner will need to be properly adjusted.

These tips should help the installer properly convert this range to LP gas. If you need more help, reply with additional details and we will assist you further.

If you need a qualified installer to complete this conversion, I recommend that you contact your local gas supplier.

Read More
Lyle W -
Sears Technician
March 24, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
March 24, 2011
See more answers

Top Parts