Model #79071163700 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

my oven does not get hot enough to cook 79071163700 Kenmore Gas range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions.
Your Sears partsdirect expert will research your question and respond within two business days but usually sooner.
Thank you for using Searspartsdirect.com!

Read More
Henry -
April 22, 2013
A:

I know that it can be very frustrating to have issues with your washer. The bake element could have failed or the oven control board. This type of symptom will require testing the bake element, the voltage supply to the bake element and testing to see if the oven control board is closing the bake relay using a multimeter. If you don't feel comfortable doing this yourself, just click on this link: Sears Home Services. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
April 22, 2013
See more answers
Q:

Kenmore Gas Range oven/broiler gas safety valve.

A:

Definitely having to do repairs yourself can be a challenge to help in determining if you have the right part I would suggest revisiting Sears parts direct.com where you can find a direct number to speak with a parts associate in regards to finding the correct part for your Range. I have attached a link below. Hope it helps!

Read More
Priscilla V -
November 23, 2011
A:

Thank you for your question on the safety valve for your range.

The only difference is the positioning of the orifice on the valve for LP vs Nat.

The orifice is up for Nat and threaded down for LP.

Are you sure that the problem is the safety valve?

I have found much more often then not it is the igniter that has failed to pass enough current to the safety valve even though the igniter is on and red.

See the image below for some information on how to check the igniter.

Safety valve part number .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
November 25, 2011
See more answers

Top Parts