Model #79071152700 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

how to remove a top burner valve from a wiring harness on a kenmore gas range 790.71152700

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

Looking at the information I’m showing those should just slide right off that spark ignitor wire harness. Click here for some information on the internet that should help you figure this issue out.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
April 20, 2015
Q:

I have a Kenmore Gas Range that has been converted to LP. What would it take to convert it back to NG. Mod#790.71152700.

A:

Good morning.... I can appreciate your wanting to use NG. It's likely you'll only need a conversion kit. I've supplied a link below that will connect you with Sears Parts Direct.com, specifically, your model number. The second link will provide you some information on the conversion. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
April 11, 2013
A:

I have checked Parts direct. They do not show a kit to go back to NG. If I could find the paperwork telling how to convert to LP, it would give me some direction as to how to go back. I have been in the service business for 40 years, just do not work on many gas range's.

Read More
Jerry -
April 11, 2013
A:

Thank you for your question. The information you have received is very good. This conversion should only be done by a qualified technician. You will need to convert the pressure regulator, the natural gas orifice spuds 316470400 and position the oven burner spuds back to the natural gas position. Follow the directions you have received in reverse. I hope this will help you. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.  

 

 

 

Read More
Scott D -
Sears Technician
April 13, 2013
See more answers
Q:

Oven does not work...can't get the button panel to do anything 79071152701 KENMORE GAS RANGE

A:

The panel not working on the on range be be frustrating. I found some information for you that I am hoping will help you until your expert answers your question. I am adding the link below to help you with your question while you wait for your expert response. I do hope that this will help you with range.

Read More
Marc -
August 26, 2012
A:

Thank you for your question and I understand your concern.

If you unplug the range for a few minutes and then reconnect the power, the display should flash 12:00. If it flashes 12:00, press the clock icon and press the up or down arrow pad to set the time of day. If the electronic oven control/clock does not flash 12:00, the electronic oven control/clock assembly will need to be replaced. The electronic oven control #316455430 can be ordered from Sears Parts Direct. The oven control can be accessed and replaced from the rear of the range. Disconnect the power cord from the power source before removing the panel from behind the console. The control board is fastened by a screw in each corner of the control. Disconnect one wire at a time from the old control and transfer it to the new control to the appropriate terminal.

I added Use and Care Guide to view or download.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 28, 2012
See more answers

Top Parts