Model #79070419502 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Need assistance with installing the igniter for my oven.

A:

I understand that you need help installing and removing your igniter. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful.

Read More
Alina F. -
February 11, 2011
A:

Thank you for you question.

I should be able to help you replace the ignitor in the oven. First, unplug the range and remove the oven door. I have provided you with an image of how to remove the oven door. Then remove the two screws securing the oven bottom and lift it out. Next, remove the nut that is securing the flame spreader on the top of the burner. You should be able to see the ignitor now. To access where the wires are connected you have to remove the drawer. Make a diagram of how the wires are connected and remove them. Then remove the crews securing the ignitor. The replacement ignitor might not have the plastic wire harness connector on the end of the wires but it does come with ceramic wire nuts. To replace the ignitor, you will need to cut the plastic wire connector off the wires going to the ignitor and wire them to the new ignitor using the ceramic wire nuts. This will not affect the performance of the ignitor. When handling the new ignitor only touch the ceramic portion. To oil from your fingers could damage the new element if you touch the element part. Install the ignitor in the reverse order and check the operation.

I have found a You Tube video that should be beneficial to you. Please click on this link to view the video

Please let me know if you have any other questions.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 13, 2011
A:

Thank you for you question.

I should be able to help you replace the ignitor in the oven. First, unplug the range and remove the oven door. I have provided you with an image of how to remove the oven door. Then remove the two screws securing the oven bottom and lift it out. Next, remove the nut that is securing the flame spreader on the top of the burner. You should be able to see the ignitor now. To access where the wires are connected you have to remove the drawer. Make a diagram of how the wires are connected and remove them. Then remove the crews securing the ignitor. The replacement ignitor might not have the plastic wire harness connector on the end of the wires but it does come with ceramic wire nuts. To replace the ignitor, you will need to cut the plastic wire connector off the wires going to the ignitor and wire them to the new ignitor using the ceramic wire nuts. This will not affect the performance of the ignitor. When handling the new ignitor only touch the ceramic portion. To oil from your fingers could damage the new element if you touch the element part. Install the ignitor in the reverse order and check the operation.

I have found a You Tube video that should be beneficial to you. Please click on this link to view the video

Please let me know if you have any other questions.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 13, 2011
See more answers

Top Parts