Model #79049079400 KENMORE ELITE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

oven lights will not come on 79049079400 Kenmore Elite Wall oven

Q:

How to remove oven door?

A:

Removing the door to the Kenmore range takes a little patience. I am attaching a link on a similar model that may help with the release of the hinges on the range. Hope this helps while you get a response from an expert.

Read More
Anna T -
June 25, 2012
A:

The procedure for removing that oven door is shown in the image below. NOTE: That oven door is heavy. Two persons may be needed to safely lift it off of the oven.

Here is a link for the owner's manual for your oven in case you need it: Kenmore Elite Oven 790.49079400 Owner's Manual .

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
June 27, 2012
See more answers
Q:

What would cause the broil element to stay on all the time?

A:

The electronic oven control board controls the operation of the broil and bake elements by opening and closing electrical contacts inside the broil and bake relay. Based on your symptom, the failure is most likely the electronic oven control.

I added the instructions in the image below on how to access and replace the oven control board. NOTE: Disconnect the power supply to the oven before removing the control panel.

The control board is part #316418770.

Read More
Joey S -
Sears Technician
January 27, 2010

Top Parts