Model #79049063402 KENMORE ELITE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Upper Oven
    3 Results
  • Lower Oven
    3 Results
  • Doors
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Top oven doesn't heat at all 79049063402 Kenmore Elite Wall oven

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your oven. Upon researching model 79049063402; you can unplug the range power cord and remove the elements, thermostat and the temperature probe when the oven it is not hot. With these parts removed you can test the mention parts for continuity, if one of the parts test reads not continuity then that part may need to be replaced.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 11, 2015
Q:

Wiring Diagram 79049063402 Kenmore Elite Wall oven

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about a wiring diagram for your friend’s Kenmore Elite wall oven model 79049063402. I am so sorry it has stopped heating. I think it is wonderful that you are helping out a friend and I will be happy to help you with the wiring diagram. I have included an image of it at the bottom of this post that you should be able to view and print it. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME).

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
June 10, 2015
A:
Rachel Morgan -
Sears Technician
June 10, 2015
See more answers
Q:

Kenmore Elite Double Wall Oven 790.49062402 not working after running a self-cleaning cycle

A:

Having your Oven that we depend on a daily base to stop working and give problems is very disappointing. While you are waiting on an expert to answer your question, you can visit Sears Home Services website to set service with a Sears technician to diagnose your problem. I have attached the link below. Hope this helps!

Read More
Dezeray S -
June 29, 2011
A:

This oven has a thermal safety switch (also called safety thermostat) on the back outside wall of each oven. I provided a wiring schematic for the lower oven in the image below that has that component marked. The second image shows a photograph of that component. It has a red reset switch on the back of it. The third image shows the location of that component on the back of the oven. If you are able to shut off the circuit breaker and pull the oven out of the cabinet, you can reset that switch by pushing the red button on the back. That may allow the oven to heat based on your symptoms.

If this does not help, you could have a wiring failure in the circuit or a failed thermal safety switch. Reply with additional details if you need more help with this problem.

Read More
Lyle W -
Sears Technician
June 29, 2011
A:

Hello Lyle I have a 790.49063402 double oven having similar issue. Top oven stopped working after doing some broiling. Now neither bake or broil heat up. Controls seems to work fine and bottom over is working without issue. Does this model also have a safety thermostat that needs to be reset? I could not find one looking at parts list.

Read More
Raymond -
September 23, 2012
A:

Hello Raymond. That model of oven does have the safety thermostat that is described in that above thread. That safety thermostat is shown as Key 119 in that parts diagram. It is located on the outside back wall of the oven cavity as shown in that third image above. You will need to shut off the house circuit breakers for the oven and pull it out of the cabinet to access that thermal circuit breaker. Remove the outer back panel on that upper oven and you should see that component. Resetting it may allow that upper oven to heat properly. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
September 24, 2012
A:

Hi Kyle, Thansk for the info , I'll give that a try may not be untill the weeekend. Will the Oven have to come completely out out fo teh cabinet to get to the back panel or will leaning it forward with help, be enough?

Read More
Raymond -
September 24, 2012
A:

You will need to pull it out far enough to access and remove the outer back panel on that oven. You can position a chair or stool that is sturdy enough to hold the weight of that oven and then slide it out far enough to turn it at an angle if possible to access that back panel. If you can loosen the screws on one side and then remove the screws on the other, you can then carefully pull that panel outward to access the thermal circuit breaker and reset it. I hope that this additional advice helps. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
September 25, 2012
See more answers

Top Parts