Model #79048783900 KENMORE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

inaccurate heating 79048783900 Kenmore Walloven

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear that the actual temp is so far off of factory setting. I know how frustrating that is to have happen.

It could be that the oven temperature probe sensor is defective and is not properly sensing the oven temperature. I would recommend removing the sensor and testing it for resistance. At room temperature, the sensor should measure approximately 1100 ohms. If that reading is off, a replacement sensor may be needed. If it checks out, the electronic control may need to be replaced. 

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 04, 2014
Q:

kenmore wall oven 79048783900 Kenmore Walloven

A:

Thank you for choosing sears I would happy to help you with your washer. Upon researching model 796.40272900; it sounds like you may need to replace the oven probe sensor. The oven probe sensor works with the main control board to regulate the oven temperature. If there is an oven temperature problem, this sensor might be defective. I have posted a link below of the oven probe sensor key#37.

 I trust this information will help you, Thank you have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 09, 2014

Top Parts