Model #79048023801 KENMORE ELITE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

oven shows err on panel 79048023801

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model 79048023801; it sounds like the electronic control board may need to be replaced. The electronic control board governs the functions of the oven so when it begins to fail it can cause the unit to become unresponsive at times. I have posted a link of the electronic control board to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

                                                                                                                                                                                                               

Read More
CarlosZ -
Sears Technician
May 27, 2015
Q:

Kenmore oven broken

A:

Good morning Joel, I'll be happy to assist you. There could be two main issues. I have provided a link below that will go over these two particular issues with you. There are links within this link that may also prove to be helpful. Explore these while you are waiting for an expert response, which you should receive within a day or two. Have a nice Saturday.

Read More
Henry -
September 08, 2012
A:

As Henry said, could be to issues: 1) F95 = Door motor mechanism failure. The motor does not stop rotating. 2) Segments of the blue LED electronic oven control may be missin, fading or do not operate correctly = Replace the origninal electronic oven control.

Read More
Chat in RI -
September 10, 2012
A:

The above posts are correct about that F-95 error code. It indicates a problem with the oven door lock system. Since you are seeing this code appear when the oven begins to heat up then it is likely caused by a failed oven clock control board in the console. That problem with the digital display is definitely caused by a bad clock control board. Replacing that clock control board in the console may fix both of these problems. I recommend that you have a service technician complete that type of repair on this oven. You can schedule service through this link: Sears Home Services .

If you want to fix this problem yourself, reply to this thread and we will assist you further.

Read More
Lyle W -
Sears Technician
September 10, 2012
See more answers

Top Parts