Model #79048023800 KENMORE ELITE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Can the display on the control panel be replaced? 79048023800 Kenmore Elite Walloven

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the wall oven.
 
Glad to help out.   Im  looking at your Kenmore oven model number 79048023800.

What you need to do is replace the control panel with touch pad.   Comes as 1 unit.   It would be best to take it apart first and see if the ribbon from the control panel to the control board is warped, burnt, or came loose on the connection.   Somtimes people get lucky in just straightening out the ribbon and rehook up.   Good luck.
  
Just need to click on the bottom link if  you  would like to order it.


Control Panel for model 790.48023800

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
March 24, 2014
Q:

how to determine wall oven dimensions????

A:

Needing the dimensions for your appliance can be really important to know. While you are waiting on an expert to answer your question, I found your installation guide in the Manage My Life website. I have attached the link below. Hope this helps!

Read More
Dezeray -
January 22, 2013
A:

That oven is a 27" model. I see that Dezeray posted the installation guide for that model in the above response. I added an image below that shows the dimensions of your model along with other information that you may need. I provided the KW rating and the normal electrical breaker size needed for that model. This should be the information that you need. If we can help you further, reply with additional details.

Read More
Lyle W -
Sears Technician
January 22, 2013
A:

Here is the image.

Read More
Lyle W -
Sears Technician
January 22, 2013
A:

Thank you so much for the info. I think this is exactly what our cabinet guys will need. I searched the internet and could not find this anywhere-even with putting in my model number. Thank You!!! Thank You!!! Thank You!!!

Read More
chris -
January 22, 2013
A:

Just an added , same problem with the cabinet guy. Our "cutout dimensions & cabinet width" fact sheet gives a min & max and for some reason the cabinet guy is having problem with interpretation.. I take it to mean that the cabinet opening for our model , 22-42003 dbl wall is MINIMUM 28 1/2 IN AND max 29 WIDTH AND 48 7/8 IN (MIN) AND 49 7/8 IN (MAX) FOR HEIGHT? Would that be correct? Seems plain which would mean to me there is a sort of "lip" around the actual oven which allows a mounting surface to keep oven from entering too far into the cabinet?

Read More
James -
July 03, 2013
A:

James: It means the cut out cannot less than 28 1/2 wide or any wider than 29 inches or it will not fit or it will show a gap because the oven trim would not cover an opening wider than 29 inches. The lip/trim will cover a small gap of 1/2 inch. The minimum height is 48 7/8 inches and maximum cut out height is 49 7/8 inches as you noted.

Read More
Joey S -
Sears Technician
July 05, 2013
See more answers
Q:

brand new wall oven #79048023800 wont heat up

A:

Sounds like you might not have the 220 volt connected. I am sure that unit is a 220 /240 connection if it is check your connections might have loose wire connection.

Read More
Anonymous -
August 17, 2011
A:

Sounds like you might not have the 220 volt connected. I am sure that unit is a 220 /240 connection if it is check your connections might have loose wire connection.

Read More
elias -
August 17, 2011
A:

Thank you for your question and I understand your concern.

Based on your details and symptom the thermal circuit breaker (key#119) has tripped breaking the line two voltage to the oven elements. The thermal circuit breaker is located on the back of the wall oven. It would have to be pulled out from the installation in order to access and replace it. I added an image below showing where the thermal circuit breaker is located and how to access it. The image also has some simple instructions on how to relocate the thermal circuit breaker which should help prevent it from prematurely tripping. _NOTE: If you plan on doing it yourself, disconnect the power supply before removing the wall oven.

Since the wall oven is new, you should call Sears and set up a service appointment to have it repaired. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 19, 2011
See more answers

Top Parts