Model #79047893602 KENMORE ELITE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Why is my Kenmore Elite Oven #790-47893602 not heating?


I am glad to see you are are asking for assistance from the experts before making an expensive repair call. A similar question has been asked on Kenmore oven as you will see in the link provided below. Hope this helps while waiting on additional information within two business days.

Read More
Anna T -
November 09, 2012

That link for a previous answer that Anna T. posted in the above response describes a similar scenario. In that situation, the thermal circuit breaker on the back of the oven was tripped. You may be able to shut off the house circuit breakers for the oven and pull it out of the cabinet. You can use the installation manual as a guide for that task. Here is a copy of that installation guide in case you need it: Installation Instructions . Once you pull the oven out, you can remove the outer back panel. You should see a thermostat with a red button on it. Press the red button to reset that component. Reassemble the oven and install it back into the cabinet. See if the oven heats after resetting that thermal circuit breaker. If it does, then I recommend that you monitor the performance of the oven for the next several uses. Make sure that it is not overheating. Check the elements to make sure that they are cycling on and off properly once the oven is heated to the set temperature. If the oven works properly after resetting that thermal circuit breaker, then you probably won't need service.

If you are not able to pull the oven out of the cabinet or a tripped thermal circuit breaker is not causing this failure, then you will probably need to schedule service. You can schedule service online through this link: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 10, 2012
See more answers

Top Parts