Model #79047789400 KENMORE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Removing oven door from wall oven

A:

I see you are having trouble with your appliances. I see how frustrated you may be for the instructions not to help you. While you are waiting on an expert to answer your question. You can visit SearsHomeServices.com website to set services with the Sears tea. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
September 07, 2010
A:

I reviewed the instructions and they seem to be fairly descriptive. I cannot see anything that I could add that would make any clearer. Once you have both left and right hand locks engaged, grab both sides of the door and pull the bottom of the door up and toward you to disengage the door from the hinge supports. Keep pulling the bottom of the door towards you while rotating the top of the door towards the range and lift up to remove the door. You will need to be strong enough to lift the weight of the door in order to remove the door. You may want to ask for help from a neighbor.

Read More
Joey S -
Sears Technician
September 09, 2010
See more answers
Q:

What mounting brackets, etc are needed to install my wall oven (79047789400)?

A:

I see you just bought a Wall Oven. I see how frustrated it may be to buy something new and it not come with everything you need. While you are waiting on an expert to answer your question. You can visit SearsPartsDirect.com website and search for the things you need. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
September 07, 2010
A:

Thank you. I have checked out the website and it gives the parts that I need, but it doesn't indicate if how many of the items are required; for the brackets, I'm assuming two (2). It also doesn't provide the number of screws or type of screws needed. I have not had much luck with the customer service representatives in Parts Directs. They don't know the details.

Read More
DIYhandylady -
September 07, 2010
A:

Here is a link for the installation guide for this model of oven: Installation Instructions . This guide shows that you will need the installation kit that is pictured in the image below from the RepairClinic.com website. The part number for this kit is 5304440067. You can also order this kit from the Sears PartsDirect website. This kit has the screws that you will need to mount the brackets and also has the screws to mount the bottom trim piece on the oven. If you don't have the bottom trim piece, you can order that part using part number 318259711 (this is the black color). This should help you proper install the oven. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
September 08, 2010
See more answers
Q:

Why does my Kenmore wall oven model 790.47789400 fan run all the time?

A:

Why does my Kenmore wall oven model 790.47789400 fan run all the time?

It sounds like the cooling fan will need to be replaced. The cooling fan comes on after baking to allow the electronic components to cool off while the oven is heating & after baking is done until the safety thermostat is satisfied.

Read More
Joe G. - Personal Solutions Manager -
Sears Technician
January 09, 2010

Top Parts