Model #79047782404 KENMORE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

no heat

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
March 30, 2012
A:

Thank you for your question and I understand your concern.

If the oven is getting the proper voltage (220) and the bake and broil element has quit heating at the same time, I suspect a faulty electronic oven control.

I added an image below of the wiring diagram. You will see a double line break relay which supplies the line two voltage supply to both heating elements. I suspect this is what failed preventing both oven elements from heating.

This may be the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
March 30, 2012
A:

How much $ to repair?

Read More
Anonymous -
June 04, 2012
A:

Newbie: The electronic oven control is approximately $297.47 and the service fee would be approximately $150.00.

Read More
Joey S -
Sears Technician
June 05, 2012
See more answers
Q:

Kenmore oven model 79047782404

A:

I'm sorry about the difficulties your having with your Kenmore Oven Installation. I did some research for you at Managemylife.com and found the installation guide for you. I hope this will help until your expert can answer your specific question. I attached the link below. I hope the provided information is useful to you.

Read More
James -
July 27, 2011
A:

Sorry, but this is an electric oven, not gas........Thanks, Frank

Read More
Frank -
July 27, 2011
A:

Thank you for your question on the wall oven.

The voltage requirements for the this wall oven is 40 amps circuit at 240 volts AC.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 28, 2011
See more answers
Q:

how to install timer on my range model #79047782404.

A:

I know it is frustrating to have an appliance you depend on go down. Managemylife.com is always a great resource to find answers to just about anything. You have given your expert a great description so he will be able to walk you through the repair . He will respond shortly

Read More
James -
January 05, 2011
A:

my range model # is 79047782404, but my control panel is 318274802. thanks you

Read More
Debbie -
January 05, 2011
A:

Still waiting for a answer do you know I think I know where the red and black wire gos can you tell me where the blue, yellow and brown wires go. thank you

Read More
Debbie -
January 06, 2011
A:

I am sending you an image of the wiring connections for the new clock.

The molex plug connectors go into the receptacles they will fit into. The connectors will be ok as long as they fit into and fill the receptacles. Don't plug a 4 wire connector into a 8 terminal receptacle.

  • The black wire goes to the L1 terminal.

  • The yellow wire goes to the "bake" terminal.

  • The blue wire goes to the "broil" terminal.

  • The red wire goes to the "L2 in" terminal.

  • The brown wire goes to the "L2 out" terminal.

Read More
Jimmy K -
Sears Technician
January 07, 2011
See more answers

Top Parts