Model #79046829102 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Error code "F9" on Kenmore range 790.46829102

Q:

9trying to put oven in cleaning mode and getting error message "F9". This is a Kenmore Elite range oven combo model # 790.46829102.

Q:

how to install 9030979040 model# 79046829102

A:

having to work on an appliance can be a challenge.While you are waiting for an expert to reply I to reply back to this thread with a more detailed question. Which this will allow an expert to reply with a detailed answer.

Read More
Priscilla V -
March 16, 2011
A:

Thank you for your question and I understand your concern. The dual burner infinite switch should have come with wiring instructions if there was any difference in how it should be connected, otherwise the terminals markings should be the same as the original switch. Remove one wire at a time from the old switch and connect it to the matching terminal on the new switch. It should have the same terminal markings on the old and new switch. They will be marked P1, P2, S1, S2, 4, 4A and 2.

I do not have model specific instructions on how to remove the control panel but I did add an image below with the basic instructions. NOTE: Disconnect the range from the power supply before access the burner switch. Remove the knob and you will find the two screws securing the burner switch to remove.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
March 17, 2011
See more answers

Top Parts