Model #79046823102 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a kenmore elite model 79046823102 and a few days ago the right front burner stopped working it is the expandable element burner type

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
aashe -
November 16, 2011
A:

This type of failure will normally need to be diagnosed and repaired by a service technician. You could have a bad element, a wiring failure or a bad burner switch that is preventing that right front burner from heating. The components are not easy to access. That is why I recommend that you have a service technician repair this failure. Here is a link for the Sears Service website: Sears Home Services .

If you want to fix this problem yourself, you can shut off the house circuit breaker for the range to disconnect electrical power and access the burner switch in the console. You will need to lift the glass top off of the range and access that switch from the back. You can use the wiring diagram shown below to check the continuity through that switch. This may help you determine the cause of your failure. If the switch is working properly, you can check the wiring connections between that switch and the element. If you find no problems with the wiring, then you will probably need to replace that element.

You can order parts from the Sears PartsDirect website.

Be sure that you shut off the house circuit breaker to disconnect power from the range before accessing and replacing internal components.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 17, 2011
See more answers

Top Parts