Model #79046822100 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore elite electric range F3 error code 79046822100

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the range getting the F3 error code.
 
Glad to help out.   Im  looking at your Kenmore Range model number 79046822100.

F3 FAIURE CODE IS A CONTROL BOARD or OVEN SENSOR PROBE PROBLEM:

LIKELY FAILURE CONDITION/CAUSES:

1.  Shorted keypad.

2.  Control's internal checksum may have become corrupted.

3.  Control has sensed a potential runaway oven condition.  Control may have shorted relay.   Sensor probe may have gone bad.

SUGGESTED CORRECTIVE ACTION:

1.  Replace Electronic Oven Control Board.

2.  Disconnect power, wait 30 seconds and reapply power.  If fault returns upon power-up, replace Electronic Oven Control.

3.  Check Sensor probe and replace if necessary.  If oven s overheating, disconnect power.  If oven continues to overheat when the power is reapplied, replace Electronic Oven Control.  Severer overheating may require the entire oven to be replaced, should damage be extensive.

Service
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsServiceCrew.com
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 03, 2014
Q:

Kenmore elite electric range F3 error code 79046822100

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the range getting the F3 error code.
 
Glad to help out.   Im  looking at your Kenmore Range model number 79046822100.

F3 FAIURE CODE IS A CONTROL BOARD or OVEN SENSOR PROBE PROBLEM:

LIKELY FAILURE CONDITION/CAUSES:

1.  Shorted keypad.

2.  Control's internal checksum may have become corrupted.

3.  Control has sensed a potential runaway oven condition.  Control may have shorted relay.   Sensor probe may have gone bad.

SUGGESTED CORRECTIVE ACTION:

1.  Replace Electronic Oven Control Board.

2.  Disconnect power, wait 30 seconds and reapply power.  If fault returns upon power-up, replace Electronic Oven Control.

3.  Check Sensor probe and replace if necessary.  If oven s overheating, disconnect power.  If oven continues to overheat when the power is reapplied, replace Electronic Oven Control.  Severer overheating may require the entire oven to be replaced, should damage be extensive.

Service
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsServiceCrew.com
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 03, 2014
Q:

How do I wire the replacement element for my sears slide-in range?

A:

Whenever you have a replacement part to install, the location of the terminals may be different but the wiring stays the same. If the size of the terminal is too big or too small you may need to replace the connector or you may have the wrong part. We need to know exactly what is different, wire color, wire location or size of connector is wrong. Please resubmit with the updated information so we will be able to help you get your stove repaired.

Read More
biker dave -
Sears Technician
April 09, 2009

Top Parts