Model #79046804992 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring
    3 Results
Find part by diagram >

Question and Answers

Q:

cause of F 1 Erorr code on elite Model 7904680992 range 79046804992 SN# NF02714648

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Henry -
July 02, 2013
A:

Thank you for using ManageMyLife.com. I'm sorry to hear about the issue you are having with the Kenmore Elite, I know how frustrating it can be.

The "F1" fault code indicates an error in the electronic oven control circuitry. The failure is most likely the electronic oven control board and a slight possibility of a faulty oven temperature sensor probe. The oven temperature sensor should have a resistance measurement of 1050 to 1100 ohms at room temperature (see image below). The oven temperature sensor can be remove from inside the oven cavity and tested using an ohm meter. If the sensor measures approximately 1050 to 1100 ohms, replace the oven control board.

Hopefully this will be of assistance in figuring out which component needs to be replaced. If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 02, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when needing to fix your range.

When it says F1.   That means you have to replace the cock timer.   I will show you 3 and all depending the color of the range.   1st one will be black, the second bisque, and the third one is a white color.

http://www.searspartsdirect.com/partsdirect/part-number/318019902/0022/628?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=318019902&sid=MMLxexpertmerch

http://www.searspartsdirect.com/partsdirect/part-number/318019903/0022/628?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=318019903&sid=MMLxexpertmerch

http://www.searspartsdirect.com/partsdirect/part-number/318019901/0022/628?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=318019901&sid=MMLxexpertmerch

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
July 02, 2013
A:

can you provide me with the part # for the oven control board for the Kenmore Elite range model # 79046804992

Read More
john -
July 02, 2013
A:

I'm showing we only have the control panel in Bisque and the part number is 318005566

Read More
Desirea -
Sears Technician
July 02, 2013
A:

what is the cost?

Read More
john -
July 02, 2013
A:

Price is a Sears guarantee of $49.49 not including shipping and taxes. To get a full price you can visit Searspartsdirect.com. Thank you.

Read More
Natasha12 -
Sears Technician
August 23, 2013
See more answers
Q:

How do I change my Kenmore Elite Model # 79046804992 from C back to F

A:

When it comes to changing parts on your appliance that can be quite a challenge. While you are waiting on an expert to answer your question, I was searching in the Sears Parts Direct website and found your diagram. I have attached the link below. Hope this helps!

Read More
Dezeray S -
January 22, 2011
A:

Thank you for your question.

I have checked the model number you have submitted. I copied the instructions for setting the control back to Fahrenheit. Please follow the instructions in the image below. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 24, 2011
See more answers

Top Parts