Model #79046802991 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Dppr
    3 Results
  • Wiring
    3 Results
Find part by diagram >

Question and Answers

Q:

Need help rewiring burner switches Kenmore stove model #79046802-991.

A:

It seems you have done a great job diagnosing this issue. An expert will respond with a detailed answer to get to the bottom of this problem. It usually takes 24-48 hours. If you would like to schedule service you could visit the Sears Home Services website. I attached the link below. I hope this helps!

Read More
Jackie S -
May 19, 2011
A:

Look closely on the new switches. The terminals are marked with numbers. I am sending you an image showing which color wires go on which number terminals. I apologize for the quality of the image I am sending. It is as clear as I could make it.

Follow the instructions that came with the switches. They tell you to cap off the black wire that went to S1. Put the purple wire that goes to the pilot light on the Y terminal with the red wire that goes to the inner coil of the element. Connect the Y terminal to # 4 on the new switch.

If you have questions, reply on this thread and I will be glad to help.

Read More
Jimmy K -
Sears Technician
May 20, 2011
A:

Thank you Jimmy for your prompt reply. Your diagram was very helpful, and I have successfully installed the switches!! The instructions that came with my switches were different from what you described above, but with the diagram and careful examination of the other switches, I was able to get those burners working again!! I wish I'd written sooner. Thanks again!

Read More
Cheryl -
May 23, 2011
A:

You are welcome, thanks for letting me know you got the switches wired and working.

Read More
Jimmy K -
Sears Technician
May 23, 2011
See more answers

Top Parts