Model #79046763900 KENMORE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

F90 CODE OVEN DOOR DOES NOT LOCK 79046763900 Kenmore Electric range

Q:

I have a Model #79046763900 Kenmore Electric range, wanted to change the top section to a Ceramic Smoothtop Cooktop.

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner. Have a great day!

Read More
Alina -
August 25, 2012
A:

Thank you for your question and I understand your concern.

There is not a kit available nor as there ever been a kit produced to convert your conventional coil type surface elements to the radiant burners with a smooth glass top. You would have to purchase a new range with a smooth top.

I hope this is helpful.

Read More
Joey S -
Sears Technician
August 27, 2012
A:

so not even trying to exchange the whole top section will work, It seem possible though. Thank you. I apreciate for the reply =)

Read More
yutaro -
August 27, 2012
See more answers
Q:

leveling drop in stove

A:

I feel the counsel you received may well be founded. I have included an installation manual in the link below for you to review, in case you don't currently have one. You will be receiving an expert response shortly. I hope this helps you for now and have a nice day.

Read More
Henry -
August 23, 2012
A:

Thank you for your question and I understand your concern.

Your range is considered a slide in range and not a drop in. Removing the front leveling legs will not affect the range but be sure the main top is not resting and/or supporting any weight on the counter top. Also make sure the floor does not interfere with the storage drawer sliding out and in.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 24, 2012
See more answers

Top Parts