Model #79046702603 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

what is sd or 5d mean

A:

Once you find out what an error code, SD, means on the Kenmore range, the rest is easy. I hope the instructions in the link provided below is helpful while waiting on model number specific information.

Read More
Anna T -
November 05, 2012
A:

Thank you for your question and I understand your concern.

The "sd" indicates the oven control is in the Sales Demo mode.

A sales demo (SD) mode is available that allows the TSC panel functions to be demonstrated without turning on any heating elements.

To enter or exit the SD mode disconnect power to the range. Reconnect the power and within 45 seconds touch the "OVEN COOK TIME" keypad on the TSC panel and hold until "sd" appears in the EOC display (approximately 6 seconds). The time of day display will blink until the clock is set. In the Sales Demo mode all control panel and display functions can be demonstrated but the elements will not heat.

To exit the Sales Demo mode you must repeat the procedure used to enter the Sales Demo mode. Disconnect the power to the range; reconnect the power and within 45 seconds touch and hold the "OVEN COOK TIME" pad until the "sd" display disappears. You can not exit the Sales Demo mode by pressing the Stop/Clear keypad or by resetting the power to the range.

This may be the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
November 06, 2012
A:

does that work for fridgedaire this models as well CPEF3081KFC there is not oven cook time what button do we use need help asap have had no stove since thursday

Read More
jenn -
November 18, 2012
A:

Jenn: Try using the "Bake Time" button in place of the "Cook time".

Read More
Joey S -
Sears Technician
November 19, 2012
A:

Hello, I can not leave the "SD" mode. I press the button, "Cook Time" and the error persists. This is my control panel (https://kn3.net/60077384978JPG.html). I need your help Model: 790.78033300 https://kn3.net/60077384978JPG.html

Read More
Ronny -
January 12, 2016
See more answers
Q:

Had power surge. Cook top works but oven & clock does not, can it be fixed? 79046702603 Kenmore Elite Electric range

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your range and do understand your frustration. Glad to help out. Im looking at your model number 79046702603 and from your description it does seem like the controller may have shorted out with the surge. A symptom is a bad controller is the display does not light or work and the oven will not function. 


I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page.
 
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Sherman_G_Wallace -
Sears Technician
February 06, 2014
Q:

Replacing Sears Kenmore Mo # 790.46702603 SN NF72816513

A:

I know that it can be very frustrating to have issues with your range. The first thing to do is disconnect the range from the power source. Remove the cover on the back side of the console. You will see the control board/clock. It is usually held in position with 2-4 screws. If you unit is covered under warranty, then it would be best to wait for the technician. If you do any damage to the board or the wiring, it will not be covered under the warranty. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 20, 2013

Top Parts