Model #79046702600 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Range Model 790.46702600 79046702600 Kenmore Elite Electric range

A:

The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
James -
January 01, 2013
A:

Thanks for the inquiry about the cubic ft. of you oven cavity, I will be able to assist with this.
I have researched and was able to find sales literature that states this is a 4.2 cubic ft.
I hope this is helpful.

Thanks Ron H.

Read More
Ron H -
Sears Technician
January 03, 2013
See more answers
Q:

Why won't the self cleaning button work on my Kenmore Elite electric range model 790.4670?

A:

When you press the FLEX CLEAN button, 300 should appear in the display as shown below. Press START to begin a 3 hour cleaning cycle. The procedure for setting the cleaning cycle is shown in the first image below. Make sure that your oven door is firmly closed when starting this cycle. If the control experiences a problem with the door being sensed as open or the door is not sensed as locking correctly then you will normally see an error code in the display. If you see this type of error code then I recommend that you resubmit your question with additional details.

Make sure that your control is not locked. The second image below shows how to use this feature.

If the control is not locked and it will not respond to the FLEX CLEAN button, then you will need to replace the electronic control board to fix this type of problem. You can order a new control board from the Sears PartsDirect website. Based on the partial model number that you provided, the part number for the control board is 316462821. You may want to verify this number on the Sears PartsDirect website using your full model number. It will be in a format such as 790.46702600.

The procedure for accessing and changing this control board is shown in the third image. Be sure to shut off the breaker to disconnect electrical power before accessing this internal component if you replace this board yourself. Do not attempt this repair yourself unless you are completely confident in your technical ability to safely execute the procedure.

If you need more help, resubmit your question with additional details and the full model number of your Kenmore range.

Read More
Lyle W -
Sears Technician
July 29, 2009
Q:

Is it ok to seal the glass cook top of my Kenmore elite slide in range to my marble countertop?

A:

According to the manufacturer you should not seal the range top to the side cabinets. You should be able to find some kind of divider trim that bridges the gap. I did not see one at Sears.

Read More
biker dave -
Sears Technician
March 04, 2009

Top Parts