Model #79046699700 KENMORE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

install glass stovetop 218223661 on stove 790.46699700

A:

Without any instructions it can be difficult to remove the glass top for your range. I researched your question and was able to find a couple links with information for this project, specific to your model. I attached the links below. I hope this helps.

Read More
Jackie S -
March 19, 2012
A:

Disconnect the power to the range and remove the burner knobs. Remove the nuts from the switches. The switches will not fall, the nuts hold the control panel on. Lift the control panel off to expose the screws holding the glass top on. I am sending an image that describes the rest of the repair. If you have questions, reply on this thread and I will be glad to help.

Read More
Jimmy K -
Sears Technician
March 20, 2012
See more answers
Q:

How do I remove the ceramic glass top of my Kenmore oven Model

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was able to locate your diagram. I attached the link below Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
October 24, 2011
A:

The procedure for removing the ceramic glass top on that type of range is shown in the image below. Shut off the house circuit breaker for the range before beginning that procedure. This information should help you complete that repair. If you need more assistance, reply with additional details.

This is a somewhat advanced repair. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 25, 2011
See more answers
Q:

790.46699700 Kenmore glasstop range

A:

I understand that you need to remove the glass from your range. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below if you are interested in viewing. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
February 03, 2011
A:

The procedure for removing the glass top on this type of range is shown in the image below. Be sure that you shut off the circuit breaker to disconnect electrical power before beginning this procedure. Once you remove the existing glass top, you can carefully reverse the procedure to reassemble the range.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 04, 2011
See more answers

Top Parts