Model #79046633602 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

instructions on installing a glass top on a gas range 790.46633602

A:

I can fully appreciate the need for proper instruction to complete the install of that glass top. I was able to locate a link that is very similar to the model number you have. Click on the link below to view the page. I am a little concerned over the image quality. The expert that responds will be able to send you something that is model specific. I hope this information will be helpful and have a nice day.

Read More
Henry -
August 04, 2013
A:

Thank you for submitting your question. Replacing parts can be tricky sometimes and I will be happy to assist you. The image below will instruct you in replacing the glass top of your range. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
August 05, 2013
See more answers
Q:

Need instructions for replacing Kenmore Elite oven liner

A:

That's great to hear that you are wanting to do a project on your own. I located an experts response on replacing the liner on the oven.This may be a hard project and I hope my link is useful.

Read More
Joseph P. -
August 02, 2011
A:

Thanks for the quick reply. I was really looking for detailed instructions on how to do this repair and also a time estimate for a trained professional. The link was helpful, but really just said to call a professional. Could anybody help me answer these questions? Thanks!

Read More
Foodie55 -
August 02, 2011
A:

Thank you for the request of the oven liner replacement instructions.

It is not often I say this, but this repair is not for the faint of heart. It is a specialized technical skill set that a range repair technician has. And he is not fond of doing this repair either.

It could take 3 to 4 hours or two technicians a couple of hours to replace this liner and he needs some flat panels to hold the insulation in place while he slides the old liner out and the new liner in and reassembles the range. They will have to take much of the range apart to do this job.

The factory has a jig that does this during the assembly process but a technician does not have this and has to improvise to get this repair completed.

I would suggest having a technician do this replacement.

There is an option of a Service Smart agreement where you pay an upfront charge of $239.99 + tax and no matter how long it takes that is all it will cost in labor. The other benefit is that you will also receive a 1 service agreement.

If you call 1-800-4my home you can get the details of the program and decide if you want to do that.

Please let me know what you decide and if you really decide you want to do this I will help you.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
August 04, 2011
See more answers
Q:

I own a Kenmore Elite duel fuel oven - 790.46633602 - Oven is not baking as it should and never reaches temp - bake light constantly coming on

A:

Hey There, I totally understand how frustrating it can be to have your oven not baking right. I found a your manual to your oven in our Manage My Life website under manuals. On pages 42-43 are some troubleshooting advice that may be helpful to you. I attached the link below. Hope this helps!!!

Read More
Raquel F -
June 28, 2010
A:

First you will need to check the calibration of the oven. To do this, set the temperature to 350 degrees and let it cycle 5 times. If the temperature is within 35 degrees of the set temp, then you can adjust the control. Follow the instructions in the manual on page 36 that has already been sent to you.

If the temperature is more than 35 degrees, either the control or the sensor will need to be replaced. A technician will be needed to check the sensor to determine which part has failed. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
July 01, 2010
See more answers

Top Parts