Model #79046629505 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Elite gas range glass top parts compatibility 79041033804 Kenmore Elite Dual fuel range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 09, 2014
Q:

F90 Error message

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Alina F. -
December 29, 2011
A:

The F90 error code on a Kenmore gas range normally indicates that you have a failure in the oven door lock circuit. Reply with additional details and a full model number of your Kenmore gas range for more specific help with that failure.

Read More
Lyle W -
Sears Technician
December 30, 2011
A:

Model 79078663601. there is a beeping noise and it will not allow me to cancel/stop.

Read More
Moranda -
February 01, 2012
A:

Hello Moranda. That beeping noise probably indicates that you have a component failure that is being detected by the clock control board in the console. Unplug the range for 5 minutes and then plug it back in (or shut off the house circuit breaker instead of unplugging the range if necessary). If the beeping resumes after plug the range back in or restore power, then you will need to disconnect power again to stop the beeping. If you see an error code on the display, reply with that information and we will help you further. If you see that F90 code, then you have a problem with the oven door lock circuit or the clock control board. I provided a chart of the error codes for your range in the image below. Let us know if you need more help.

Read More
Lyle W -
Sears Technician
February 01, 2012
A:

I have a F90 error message on my Kenmore Elite Dual Fuel Range Model # 790-46629505. How can i fix this so I can use my oven??

Read More
jane -
February 18, 2013
A:

Hello Jane. That F90 code indicates that you have a problem with the oven door lock circuit on the range. I posted some technical troubleshooting information in the first image below. I recommend that you shut off the house circuit breakers for the range for 30 seconds to see if that will clear that code and reset the control board. If that does not work, then you can continue with the other troubleshooting steps if you are confident that you can safely complete those procedures. I provided some basic access information in the second image. Be sure that you SHUT OFF the house circuit breakers for the range to completely disconnect electrical power before accessing internal components. That range is slightly different than yours but the basic access procedures should be the same. You can order parts from this page: Kenmore Range Model 790.46629505 Parts . Note: Those procedures are fairly advanced and will require the use of a volt/ohm meter. If you get to the point where you need to have a service technician repair the range, you can schedule service through this link:Sears Home Services. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
February 20, 2013
See more answers

Top Parts