Model #79046613501 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

F20 ERROR Kenmore Elite Electric range model #79046613501 79046613501 Kenmore Elite Electric range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model 79046613501; the “f20” error code indicates that the control has detected a problem with the communications link with the electronic surface element control. You can unplug he range power cord and check the connections between the electronic control board and the surface element control, make sure there is no disconnected or damaged wires. If the problem persist then electronic control board or the surface element control may need to be replaced.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 19, 2015
Q:

UNRESPONSIVE START BUTTON 79046613501 Kenmore Elite Electric range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model79046613501; it sounds like you need to replace the control panel. The control panel tells the control board what buttons you are pressing, so when one of the buttons fails the unit will be unresponsive to the button that has stopped working since the control board might not be getting the signal. I have posted a link of the control panel to view the link click here.

I trust this information will help you, have a great day.  

Read More
CarlosZ -
Sears Technician
February 23, 2015
Q:

lights in oven 79046613501 Kenmore Elite Electric range

A:

Thanks for the inquiry and for being a valued member.

To help you replace the halogen light within the oven, I have provided you the installation instructions which are on page 43 of the owner's manual if needed.

To replace the light bulb:

CAUTION: BE SURE THE OVEN IS COOL.

1. Turn the power off at the main source,

2. Wear a bather-faced glove for protection against possible broken glass,

3. To remove the glass shield, pull the back side of the shield toward the inside of the oven in a manner to lift it up from the oven side,

4. The glass shield should come out easily by pushing a little toward front of the range.

5. Replace halogen light appliance bulb taking care not to touch the bulb with your bare fingers. Touching bulb with your skin can leave a film on the bulb that causes it to burn out quickly.

6. Replace glass shield in opposite order and manner of removal.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
January 13, 2015

Top Parts