Model #79046602501 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

how do I reset or cancell "sabbath" 79046602501 Kenmore Elite Electric range

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the Sabbath mode on your Kenmore Elite range model 79046602501. I will be happy to help you with this.

To turn off the Sabbath feature, press and hold both the Oven Cook Time and Delay Start pads for at least 3 seconds. SAb will disappear from the display and the oven may be used with all normal functions. I have included the link below for you to view the owner’s manual online. If you need further information on the Sabbath feature please see page 30-31 of the manual. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
January 06, 2015
Q:

Need help installing a control panel

A:

I think its great that you are wanting to do some repairs on your own and I will be happy to help. I did some research and I was able to find a link with a similar question. I am also adding a second link in where you can set service to have your range repaired by a certified technician. I hope this helps with your repairs while you wait for your expert response.

Read More
Joseph P. -
October 29, 2012
A:

Joseph P. posted a link for a previous answer that shows how to open the console on that range. I posted that same procedure in the image below. Be sure that you shut off the house circuit breakers for the range before beginning that repair. Using that information, you should be able to replace that control panel. If you need more help, reply with additional details.

If you get to the point where you need to have a service technician replace that control panel, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 31, 2012
See more answers
Q:

Why are the 4 main burners the only thing that works on my range?

A:

On something like this someone will have to get a meter & start checking the wiring harness out. After replacing the parts that you mentioned there is nothing left to check except the wiring harness. I would start looking for a wiring problem at the multi plug-in connectors first.

Read More
biker dave -
Sears Technician
November 03, 2008

Top Parts