Model #79046593501 KENMORE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Clock on my Kenmore electric range slide in model # 79046593501

A:

Thanks for contacting manage my life about your range/oven model 790, 46593501; I will be glad to assist you with this. The clock will not display all the time unless you program it to do so. Here are the instructions from your owner's manual for setting the time of day clock. See Image Below I hope this helps you, if you need more help reply with added details and I will be happy to respond. Thanks for using manage my lifeIf you need service here is a link to Sears Home Services.  Ron H.

Read More
Ron H -
Sears Technician
November 15, 2013
A:

Thank u very much clock is working but it has to be hold more than 15 seconds

Read More
Mike -
November 15, 2013
A:

Hi Mike, glad to hear you got it set. You are welcome. Ron H.

Read More
Ron H -
Sears Technician
November 18, 2013
A:

Having the same issue with my kenmore c880 666530j0. Your image is a little too small and fuzzy for me to read. Could someone write the instructions for me. Thank you.

Read More
peter -
June 30, 2015
See more answers
Q:

Kenmore slide in range model number 79046593501

A:

Managemylife.com is the place to go for explanations on error codes for many types of appliances, like the Kenmore range. The link below is on the error code F30, hope this is helpful while waiting for an expert response.

Read More
Anna T -
September 17, 2012
A:

Thanks for your question about the range model 79046593501 giving an error code. I will be glad to assist with this issue.
The f-30 error code is not in your owner�s manual because it indicates a problem that normally requires testing by a technician. Special equipment and tools are needed. If you feel confident in testing the sensor probe and the harness to control I have added the process for testing.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Thanks Ron H.

1. (F30 or F31) Check resistance at room temperature &compare to RTD Sensor resistance chart. If resistance does not match the RTD chart, replace the RTD sensor probe. Check Sensor wiring harness between EOC & Sensor Probe connector.
2. (F30 or F31) Check resistance at room temperature, if less than 500 ohms, replace RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC & Probe con.

Read More
Ron H -
Sears Technician
September 18, 2012
See more answers
Q:

How do I replace ceramic cooktop on Kenmore range model 79046593501

A:

Modern cook tips are so fitted, it is not easy to see where the screws or clips are located. While you wait for the expert, you can check the links below for some help. The first link gives you access to the online owner's manual and the installation manual. The install manual may be more help. The second link is to Sears Parts Direct where you can view the exploded schematics image of the cook top. Hope this helps you with your project.

Read More
Barbara H. -
December 17, 2010
A:

Thank you for your question.

Not being able to get the old top off so you can get the new one on is concern.

I have given you the whole process for replacing the ceramic top below in the pictures.

You will need to remove the range from its installation place.

I hope the pictures will help you with your top change.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 18, 2010
A:

The pictures were exactly perfect! We got the old top off and the new on, and it even works! Thanks so much for your invaluable help

Read More
LAW0762 -
December 18, 2010
See more answers

Top Parts