Model #79046132300 KENMORE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

my oven elements are not working 79046132300 Kenmore Gas range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Alina -
March 29, 2013
A:

Thanks Alina, a quick update on the model not sure it matters or not but mine is model 79046133300

Read More
Ethan -
March 29, 2013
A:

Thank you for contacting Sears Parts Direct with your concerns about your range Ethan. I am so sorry to hear the oven elements are not working. I know how inconvenient it can be when half of the range is out of operation. I do need some additional information to help you narrow down the issue. Are you getting any error codes in the control panel when you try to use the oven? And does the system beep?
Have you cleared the oven programming and reset it? In case you have not completed this step, I have included the link for the owner's manual for you to review on line.

Owner's manaual for Kenmore Dual Fuel Range model 79046132300.

If you have already followed the procedures set forth in the manual, it sounds like you will need to replace the Electronic control. I have included that link for you also.

Electronic Control for model 79046132300

If I can be of further assistance, please respond to this thread. Thank you for choosing Sears Ethan, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
March 29, 2013
A:

Hi linda, No, I have never had any error codes or beeping. I push Bake, Broil, or Conv. and it operates as usual, set the temp and then push start. I can hear a faint click from behind the control pannel like always and then the element indicator for bake, Briol or Conv. is displayed with the temp. but nothing ever gets hot. the newest development to all of this is that now we don't have the electric ignitor for the gas cook top either. Also the link you posted fro the owners manual is no longer available. It gives me a 404 not found error and the page that loads says. Not Found The requested URL /owner_manuals/4710/KENMORE-Slide-In-Range-Electric-Gas-L0302121 was not found on this server.

Read More
Ethan -
March 30, 2013
A:

Thank you for contacting us back Ethan. I am so sorry to hear the problem with the range is actually getting worse. I also apologize the link for the manual didn't come up. That was my error. Let me give you that link again.

Owner's Manual for 79046132300.

Once you have tried resetting the electronic control check and see if it clears up the oven issue. You may have more than one issue going on as the surface burners are are separate from the electronic control. Or the problem may be with the gas supply. That is not something I recommend you work on yourself. I have included the link in case you need a technician.

www.searshomeservices.com

Let me know if I can be of any further assistance by responding to this thread. Thank you again for choosing Sears Ethan.

Read More
Rachel Morgan -
Sears Technician
April 02, 2013
A:

Hi Linda, sorry that is a bad link as well. I have the original owners manual but nothing in it tells me how to reset the electronic control. can you walk me through that process and I will see if that helps. Thanks again, Ethan

Read More
Ethan -
April 02, 2013
A:

Thank you for the quick response Ethan. I am sorry you are still not able to pull up the link. It is good to know you still have the owner's manual. You will want to press the clear/off option. Then turn off the power source to the range for 10 minutes. You can do that by unplugging it or at the breaker box. You want to give it time to clear any programming that may be "stuck" in the electronic control. Then follow the Setting Oven Controls procedures that start on page 18 of the manual.

If you continue to have the same issues, I recommend getting a service technician. If both the oven and the surface burners are not getting hot, you may have an issue with the gas valve. Because of the danger when working with gas products, at that point I think a technician is the safest way to proceed.

Let me know if I can be of any further assistance. I want to thank you again for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
April 02, 2013
A:

Thanks for getting back to me Linda, Resetting didn't change anything. It looks like I am going to have to buy the electronic control module.

Read More
Ethan -
April 03, 2013
A:

Thank you for the quick response Ethan. I am so sorry to hear that resetting the range didn't resolve the problem. Since you have had problems opening the links, I wanted to make sure you have the part number for the electronic control (also called clock timer). That number is 318198401.

You can order it on www.searspartsdirect.com or call us at 1-800-366-7278. Please let me know if I can be of any further assistance. Thank you again for choosing Sears, we appreciate you as our valued customer

Read More
Rachel Morgan -
Sears Technician
April 03, 2013
See more answers
Q:

How do I fix Kenmore oven model 790.46132300 door handle that fell off?

A:

I'm sorry that you are having difficulties with your oven handle. I did some research for you at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. I hope you will find this information helpful until your expert can respond. I have attached another link to searspartsdirect.com. It will bring up your range and some mechanical drawings that may be useful.

Read More
James -
January 12, 2011
A:

Thank you for your question.

I am sorry that the handle screw fell out and the oven door handle is not loose.

I am sorry but you will need to take the door apart on this model to get to the area where the screw goes through the door trim and into the handle.

  • Please examine the door handle screw location to make sure that the screw hole in the handle is not stripped and will not hold, even if you put it back.

  • If may require a new handle.

If you feel comfortable taking the door apart and you have some mechanical ability I will give you some instructions on how to take the door apart.

  • Take the door off the range and lay it inside facing up on a soft cloth with the handle are hanging over the end of the table.

  • Remove the screws along the outer perimeter of the door to take the door apart.

  • Lift out the inner panel and locate the screws that hold the handle on and re-install the screws and tighten.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 13, 2011
A:

How do I get the door off? It does not lift off like the door mentioned in the first answer.

Read More
blchris -
January 17, 2011
A:

Thank you for the update on the door. The door has a hinged tab a little different from the other model and once you have them in place you can lift and slide the door out of the supports in the range body. You should have the lock design as shown below. I hope this will help with the door removal. Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 17, 2011
See more answers

Top Parts