Model #79046103300 KENMORE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

removing oven element 790.46103300

Q:

Stove shuts off after oven has been a while. 79046103300 Kenmore Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

How do I replace a burner on my range?

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide to replacing that burner and have a nice day.

Read More
Henry -
February 21, 2013
A:

Thank you for your question. Replacing the top burners can be a challenge. First disconnect power to the unit. The complete top will need to be raised to access the burner. There should be a couple of screws under the top holding it in place. Remove the screws and the top should pull forward slightly and then lift it upward. With the top raised, you will be able to remove the screws holding the element support (#6 in picture) to lower and replace the burner. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
February 22, 2013
See more answers

Top Parts