Model #79044389700 KENMORE ELITE Counter Unit Electric

  • Controls
    3 Results
  • Maintop
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Cooktop repair information requested?

A:

Stephen, I can understand how important it is to have the Kenmore cooktop installation guide. I have provided a link for the installation guide, I hope this helps.

Read More
Anna T -
March 28, 2012
A:

Anna T. posted the installation guide for that cook top in the above response. That information shows you how to install that cook top in the counter.

Your question seems to indicate that you need to replace the glass cook top on that appliance. If that is the case, then I recommend that you have a service technician complete that repair. There is not a procedure or service manual available that will show how to replace that glass cook top. The unit will need to be pulled out of the counter (with the house circuit breaker for the cook top shut off ). The bottom burner box would need to be removed and the components would need to be shifted over to the new cook top. That is a formidable task without specific directions on the procedure. That is why I recommend that you have a service technician replace the cook top if that is the repair that you need to complete. Here is a link for the Sears Service website: Sears Home Services .

If you still want to complete that task yourself, then you can pull the cook top out of the counter and refer to the parts list diagram on the Sears PartsDirect.com website to help you determine how to remove that glass cook top. Those parts images are also shown below. You should find screws around the sides of that burner box that secure it to the bottom of that glass cook top. You will need to depend on your personal observation of the cook top and the parts diagrams shown below to remove that top. I hope that this information helps. If you need more assistance, reply with additional details and we will try to assist you further if possible.

Read More
Lyle W -
Sears Technician
March 29, 2012
See more answers
Q:

kenmore stove beeping and won't work

A:

Having an error code on your appliance can be inconvenient and keep your appliance from working properly and I will be happy to help. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
June 16, 2011
A:

The E0 11 code can occur due to a power surge or glitch through the electrical lines. I recommend that you shut off the house circuit breaker for the cook top. Leave that circuit breaker off for 3 minutes and then reset it. This may clear the E0 11 code. If not, then you will probably need to have the cook top serviced by a technician. You may have a problem with one of the control boards or you could have a bad wiring connection inside the cook top.

Here is a link for the Sears Service website in case you need it: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 18, 2011
See more answers

Top Parts