Model #79044383700 KENMORE ELITE Counter Unit Electric

  • Controls
    3 Results
  • Maintop
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Canning 79044383700 Kenmore Elite Cooktop

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your cooktop. Upon researching model 79044383700:  canning on a glass stove stop is not reccomended.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 06, 2015
Q:

Cook top has SF on all the display and will not start. 79044383700 Kenmore Elite Cooktop

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
March 13, 2013
A:

I know that it can be very frustrating to have issues with your cooktop. The display is likely displaying the F5 (five) error code. This could mean that you have a stuck key on the keypad on some models of Kenmore electric ranges. On others, it indicates that you have a bad electronic oven control board. You can try unplugging the range to completely disconnect electrical power. Leave it unplugged for 5 minutes and then plug it back in. This may clear the code. If not, then the control board or key pad may need to be replaced. If you would like to schedule service, just click on this link to schedule service: Sears Home Services.  If you need further assistance, please reply to this thread.  Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
March 13, 2013
See more answers
Q:

Can I replace 318282563 on Model 79044383700 or is it sealed so that I would need technition? 79044383700

A:

Good morning... I can fully understand your interest regarding access. I went to the web site Sears Parts Direct.com and found the part number you've given. Click on the link below and confirm that's the part you're interested in. Respond to this thread during your correspondence with us and let us know. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
February 21, 2013
A:

Thank You for Submitting your question to ManageMyLife.com

I can understand your concern with replacing the glass top. I was able to locate some instructions to help you with this repair.

Instructions

  • 1

    Disconnect the range's power source by unplugging it, or turning off the breaker in your service panel.

  • 2

    Open the oven door and remove the screws under the front of the glass top.

  • 3

    Lift the glass top and have another person hold the top in an elevated position so that the burners are accessible. If another person is not available, place a sturdy object under the top to secure it.

  • 4

    Remove the screws securing the burner cross-braces to the underside of the glass top.

  • 5

    Lift the glass top up and off the range.

  • 6

    Remove the brackets from the front and rear of the underside of the glass top and transfer them to the new glass top, if applicable. The brackets are secured using screws.

  • 7

    Place the new glass top on the range, sliding the tabs on the rear of the top into the notches on the underside of the control panel. Elevate that glass top using the sturdy object once again, or have a partner hold it up.

  • 8

    Secure the burner cross-braces to the underside of the glass top using the screws that were removed.

  • 9

    Lower the glass top and secure it to the range using the screws that were removed.

  • 10

    Restore power to the range.


Read More
Desirea -
Sears Technician
February 21, 2013
A:

Thanks for the replies, but we do not have a range. We have a 5-burner glass cooktop and the model # and part # are in my original message. We need to know if the glass is glued to the unit or if it has to be sent away to the factory.

Read More
Mike -
February 21, 2013
A:

Sorry for the confusion. You should be able to replace the cooktop glass too, most cooktop are just held by screws. I have found a video with showing how to replace the glass on a cooktop, the video shows a different brand but the concept is the same.

Video: How to replace cooktop glass

Read More
Desirea -
Sears Technician
February 21, 2013
See more answers

Top Parts