Model #79042003600 KENMORE PRO Built-In Oven, Electric

  • Control Panel
    3 Results
  • Upper Oven
    3 Results
  • Lower Oven
    3 Results
  • Doors
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

How do we clean stains from between the glass door panels on my Kenmore Pro wall oven?

A:

I added step by step instructions in the images below.

Read More
Joey S -
Sears Technician
June 03, 2009
A:

this image is unreadable, is it possible to post instructions in such a way that I can read? Thank you

Read More
Darci -
June 15, 2014
See more answers
Q:

cleaning self cleaning oven

A:

I understand that you want to clean your self cleaning oven. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
May 18, 2013
A:

Thanks for the information about your oven model 79042003600; sorry you are having a problem, I will be glad to assist you. Based on your description of and error code being displayed I would suspect that there is a communication problem between the boards or board and locking motor.  Generally the code would read F and a number; if I could get the actual f code it would be very helpful. There is something you can try: disconnect power to the oven for at least 30 seconds, this may reset the controlShould you still have a trouble after resetting, please respond with the error code and more information and I will be happy to respond. Your mode has very complex controls and I strongly recommend having a technician come inspect the oven and diagnose the problem, as DYI repairs are not generally recommended for this model. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
May 20, 2013
See more answers
Q:

i have a kenmore pro double oven, the upper oven heats to temp & beeps to signal, then it continues to 'heat & beep'

A:

Your looking for some solutions on why your upper oven part isn't heating correctly, it'll beat and heat up to the temperature but a little later it starts over. I found a question in Manage My Life under the Answers button that was similar to the one you asked. I think this question will be very helpful to you, and give you some suggestions. I attached the link below, I hope this helps!!!!!!!

Read More
Raquel F -
August 31, 2010
A:

Without a model number for your Kenmore Pro double oven, I am not sure exactly which control that you have. There are not very many different models. I suspect that you have the model 790.42003 . . .

On this model, the control would beep if it senses that the bake temperature is being changed on the control when the oven is set in the bake mode. You could have a problem with the control. Check to see if you see a fault code being displayed when the beeping is occurring. This could indicate that the control is detecting a component failure.

Here is a link for the owner's manual for the Kenmore Pro double oven model 79042003600: Owner's Manual . If you have this type of oven, the manual may help you with troubleshooting for this problem.

If you need more help, submit additional details and the full model number of your Kenmore Pro double oven.

This type of oven is not easy to diagnose and fix. You may need a service technician if you have a component failure in the oven. Here is a link for the Sears Service website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 01, 2010
A:

Lyle - you got the model number right. There is no code displayed when this occurs, but your explanation makes sense. I have the manual & it doesn't give any help in the troubleshooting portion. Is having a serviceman look at it my only option?

Read More
richjoy -
September 01, 2010
A:

This is a complicated control system to diagnose and fix. I still recommend that you have a service technician fix this range problem. I will provide some advanced technical information that you may be able to use. The technical information for the control and the potentiometers (temperature dials) is shown in the images below. Since we may have a problem with the temperature potentiometer for the upper oven, you can try this: Shut off the breaker for the oven and pull it out of the cabinet so that you can access the service cover on top of the control. You can view a parts list diagram on the Sears PartsDirect.com website (see link below) . Remove the service cover. Check the wiring connection of the upper oven temperature potentiometer. You could try switching the upper and lower oven potentiometers to see if the upper oven will set properly using the lower oven potentiometer. If it does then you would need to replace the upper oven temperature potentiometer.

Read More
Lyle W -
Sears Technician
September 02, 2010
A:

If the upper oven still has the same problem but the lower oven will set properly using the upper oven temperature dial then your failure is in the control board. These tips may help you resolve this problem if you want to fix it yourself. The first image shows a calibration procedure that must be followed when replacing a potentiometer. You can see by this information the complicated nature of this control system. If you need more help, let me know.

Read More
Lyle W -
Sears Technician
September 02, 2010
A:

NOTE: Be sure that you shut off the breaker to disconnect electrical power before accessing internal components in this oven.

Read More
Lyle W -
Sears Technician
September 02, 2010
See more answers

Top Parts