Model #79041039802 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Can the tracks on the warming drawer be moved up half an Inch?

A:

From my understandings you would like to adjust the warmer drawer to your Kenmore Elite Range. I found a question in Manage My Life under the Answers button that is similar to the one you asked. I think this question will give you some very helpful advice, while waiting on an expert answer. I attached the link below, I hope this helps!!!!!!!!

Read More
Raquel F -
September 21, 2010
A:

I do not see any play in the warming drawer location. Moving it up would cause the bottom of the oven door to hit it when the oven door is opened. It sounds like you have added a wood floor that prevents the range from being lowered to eliminate the gap. The only way to resolve this problem is to have the counters revised. I recommend that you have a contractor examine this installation and provide you with some options. The ServiceLive.com website has pre-screened contractors in many areas that can help you with this problem. Here is a link for that website: ServiceLive.com .

The part that you are describing sounds like the rear trim piece that is shown in the image below.

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
September 22, 2010
See more answers

Top Parts