Model #79041033800 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Elite oven door is locked close and will not unlock.

A:

The door not opening can be an inconvenience and I will be happy to help. I did some research and I was able to find two links with similar questions. I hope this helps while you wait for your expert response.

Read More
Joseph -
April 12, 2012
A:

Press and hold the Stop button for 3 deliberate seconds (or slightly longer). This should disable the control lock on the oven so that it will operate normally. That feature is shown in the image below. Here is a link for the full owner's manual on that range in case you need it: Owner's Manual .

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
April 13, 2012
See more answers
Q:

How do I replace the inside glass panel on my oven door?

A:

Replacing parts on an oven can be quite the challenge if you do not know what exactly to do, but it can definitely be done. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below if you are interested in viewing. I hope the link that I provided is helpful.

Read More
Alina F. -
May 01, 2011
A:

The first step in this repair process is to remove the oven door from the frame of the range. That procedure is shown in the first image below. The second image shows the parts list diagram for the oven door. That image will help you see the internal door components. The third image shows the basic procedure for accessing internal oven door components. You should find screws on the top and the bottom of the door that need to be removed to access the inner door glass. You may also need to remove screws on the side of the oven door. Once you get the door opened up, you should be able to replace the glass and reassemble the door. Make sure that you note the location of components when disassembling the door. It must be reassembled properly.

If you need more help, reply with additional details and we will try to assist you further.

NOTE: This is a fairly advanced repair. The door must be reassembled properly for the safe operation of the range. If you do not feel confident completing this procedure yourself, then you can have it performed by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 02, 2011
See more answers
Q:

Where do I find specifications to install my Kenmore Elite range, dishwasher & compactor?

A:

The contractor specification sheet for the range (full model number 790.41033800) is shown in the image below. The electrician will sometimes need this information to arrange the electrical power circuit for the range.

Here is a link for the installation guide for the range: Installation Instructions

Here is a link for the installation guide for the dishwasher (full model 665.13163K700): Installation Instructions

The owner's manual of the compactor (665.13633100) has the installation guide in it. Here is a link for the owner's manual for the compactor: Owner's Manual

This should be the information that you need to install these appliances. We appreciate your business. If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
November 10, 2009

Top Parts