Model #79041013802 KENMORE ELITE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

LED not displaying on control panel 79041013802

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model 79041013802; the led bulbs are not available separately from the control panel, the complete control panel would have to be ordered to replace the led bulbs that have failed.  I have posted a link of the control panel to view the link click here.  The control panel is normally secured by screws that have to be removed and accessed from the back of the unit.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 09, 2015
Q:

range burner won't turn off 79041013802 Kenmore Elite Electric range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com! 

 

 

Read More
Yadira B -
March 20, 2013
A:

Thanks for the information about your range model 79041013802; sorry you are having a problem.Based on the information provided, it appears that the relay board is bad. However there could be a slight chance of a grounded wire to the element that would cause the burner to appear on all the time. Due to the complexity of this product I would recommend having an experienced technician come inspect the range.If you feel confident in you technical abilities and have the testing equipment I have attached the wiring diagram below for your convenience. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

 

Read More
Ron H -
Sears Technician
March 21, 2013
See more answers

Top Parts