Model #79041003600 KENMORE PRO Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Pro Electric oven beeping out with ERRor but no code# 79041003600 Kenmore Pro Electric oven

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Flashing ERROR yet no error code displayed 79041003600 Kenmore Pro Electric oven

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

How can I remove the oven door?

A:

When it comes to removing parts on your Oven it can be a challenge without instructions. I was searching and found your manual and diagram that shows you steps on removing door. I have attached the links below. Hope this helps!

Read More
Dezeray S -
March 21, 2011
A:

We have the manual. But, following the instructions doesn't work as it should. Have you done this successfully?

Read More
Sara -
March 21, 2011
A:

Thank you for your question.

I can certainly understand why you would want to clean the oven door glass to improve the appearance of the oven door window.

  • First you will need to remove the door by flipping over the locking tabs all the way over as illustrated in the manual until they stop.

CAUTION: This door is very heavy.

  • Once you have the locks in place lift the door up and roll forward towards the range and let the hinges release from the hinge sockets on the range.

  • Move the door to a protected surface with the handle hanger over the edge of the surface and locate the screws that secure the door package together.

It is put together like a sandwich and you will need to remove the inner liner from the outer panel so you can get to the inside of the outer glass. There should be about 10 screws that hold the door together.

I If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 22, 2011
A:

My model does not have "locking tabs"

Read More
BOB -
October 29, 2012
A:

Hello Bob. Reply with the model number for your range or oven and we should be able to provide you with a procedure for removing that oven door.

Read More
Lyle W -
Sears Technician
October 29, 2012
A:

These answers are not satisfactory. My model number indicates to "slide off" the door. This is really a "nightmare". You should not have to call a "serviceman" to change a $22.00 inner glass. I bought the glass to do myself. What a challenge, Suggest you do not buy "Kenmore" ranges. There must be other consumers who have experienced this.

Read More
BOB -
October 30, 2012
A:

Thank you for the update Bob and you are right in that you should be able to remove the oven door and replace the glass yourself. I will give you the instructions from the owner's manual for the 790.41003600 range. If this is not the same as your model number then please reply with your ranges model number. There usually only a few styles of oven doors for removing. One has a screw that secures the door hinge to the door. The other styles are that you open the door and put a pin in the hole of the hinge and then let the door hinge seat on the pin and then lift the door off. According to the picture in the owner's manual for the 790.41003600 there is a hinged tab that pivots out and locks and then you lift up and out on the door and the door hinge section stays with the door. Please let me know what you discover or if you have a different model number. Sam A.

Read More
Sam A -
Sears Technician
October 30, 2012
A:

Sam, the model# is 790.77471793 serial# VF73205990. It is a Sears Kenmore. I have the Sears Owners Guide which is useless. .

Read More
BOB -
October 30, 2012
A:

Thank you for the model number Bob. I looked at page 17 on the owner's manual and it shows you how to open the door to the broil stop position and lift up on the door to remove it. I would suggest not positioning your hands on the door the way they show it in the manual. I find it easier to put my hands on the sides of the door with my thumbs on the inside of the door and my fingers on the outside on the door and stand with your body close to the door and pull up to slide the door from the hinge posts. Make sure that the hinges stay in the broil stop position when you slide the door up and off. If the door has never been off it make be stuck but it should come off. Then when you are done with replacing the glass, with the hinges still in the broil stop position carefully align the door hinge pockets and slide the door down onto the hinge posts. I hope this will help you with this repair. Sam A.

Read More
Sam A -
Sears Technician
October 31, 2012
A:

Thanks Sam, will give one more try. My time is limited that is why i get so "frustrated" when they say it is an "easy fix. These manufacturers have to make things more "user friendly"

Read More
BOB -
November 01, 2012
See more answers

Top Parts