Model #79040524402 KENMORE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


can i by pass an error code


Error codes tell us a lot about what is going on with an appliance, such as error F90 on a Kenmore Elite oven. I have done some research on the Manage My Life website and have located several link that you may find helpful. While you are waiting for a detailed reply from an expert I have provided the links below. Hope this helps!

Read More
Priscilla V -
April 17, 2012

There is not a method for bypassing that F90 error code. You can try to reset that control board by shutting off the house circuit breakers for the oven to completely disconnect electrical power. Leave the power off for 5 minutes. After restoring power to the oven, see if the control will work properly without displaying the F90 error code. If not, I recommend that you shut off the house circuit breakers to the oven and check those wiring connections on the lock motor assembly and the clock control board. I provided wiring information in the image below. If the wiring connections are okay, then you will probably need to replace that clock control board (part 316418550). Here is a direct link for that part: Clock Timer Control Board for Kenmore Wall Oven 790.40524402 . Be sure that you shut off the house circuit breakers for the oven to completely disconnect electrical power before accessing and replacing internal components.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 18, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show