Model #79030473401 KENMORE Wall Oven, Gas

  • Control Panel
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Door/drawer
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenmore built in oven

A:

I am sorry that you are having some difficulties with your range door and I will be happy to help. I am adding two links below to help you with your question while you wait for your expert response.

Read More
Joseph P. -
March 20, 2012
A:

Since that display is completely blank, it is likely that the clock control board in that console will need to be replaced. You indicated that the oven has power. I provided some troubleshooting in your first question regarding this problem. Here is a link for that first thread: kenmore gas built in oven .

As noted in that first answer, I recommend that you have a service technician diagnose and repair this failure. Here is a link for the Sears Service website: Sears Home Services .

If you want to fix this problem yourself, reply to this thread and we will provide more advanced repair help.

Read More
Lyle W -
Sears Technician
March 22, 2012
See more answers
Q:

kenmore gas built in oven

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. It is always a little frustrating when an appliance starts acting up on us. I'm sorry to hear that you are having some issues with your Kenmore Oven. I did some research at Managemylife website and found an expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. Read the links Barbara provided. They will be helpful too.

Read More
James -
March 20, 2012
A:

I recommend that you check the house circuit breaker for the oven. You may have lost power to the oven. If the house circuit breaker is okay, then you can check the electrical outlet unless the oven is hard wired to a junction box. If the electrical supply is okay, you could have a wiring failure or a bad clock control board. I recommend that you have a service technician diagnose and repair that type of failure. Here is a link for the Sears Service website: Sears Home Services .

If you want to fix this problem on your own and need more help, reply to this thread and we will assist you further.

Read More
Lyle W -
Sears Technician
March 22, 2012
See more answers

Top Parts