Model #7650 PORTER CABLE Drill Hammer

  • Hammer Drill
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing Amana slide in range spark module

A:

The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Dezeray S -
July 03, 2013
A:

Thank you for choosing ManageMyLife.com. I understand how important it is to have a properly working range. However, I was unable to pull instructions specifically for your model number. I have included instructions below on how to change a spark plug module and this may give you a general idea of how to proceed.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

1. Pull the range away from the wall, then unplug the power cord from the wall outlet.

2. Remove the rear panel of the range, which is secured using several screws around the perimeter.

3. Pry the old spark module off of the cabinet using a flat-head screwdriver.

4. Transfer the wires from the old spark module to the new spark module, one by one, to ensure they are installed on the correct terminals.

5. Snap the new spark module into the range's cabinet.

6. Replace the rear panel of the range, and ensure that all of the screws are securely inserted.

7. Plug the range back into the wall outlet, then move the range back against the wall.
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Spark Module for Amana Gas Range Model # ARGS7650SS-P1130766NSS
If you would like more assistance, reply to this thread and I will be glad to assist you further. Thanks for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 03, 2013
See more answers
Q:

parts manual for a craftsman 6.5 hp parts manual

A:

Hello , I found a manual using the # 919.76250. the system added a zero at the end so it is listed as 919.762500. So now to my problem. I am looking for a carb rebuilt kit because the carb is leaking out of the top of it. Suspect the float is stuck. The unit has been sitting for a few years. Can't find what is included in the carb rebuilt kit. How do I tell? Thanks again for any help you can give me. Dan

Read More
dan -
June 27, 2013
A:

Thank You for choosing ManageMyLife.com. I can understand how it is important to find a parts list for your power washer to be able to identify its parts. I would be happy to assist you with this question. However, the model number you've provided is incorrect. The model number on a power washer is located under the engine between the wheels. The model number usually starts with 3 smaller digits with a dot followed by several more digits.
If you would like further assistance, please include the complete model for your power washer and I will be glad to assist you.
Thank You for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
June 27, 2013
A:

the model number was 919.762500. I looked at it and could not find a carbuetor rebuild kit for it. I was sent to parts central. They gave me part # for a rebuid kit. They sent me a photo of the kit. It show at least 6 gaskets. But the photo was a bit fuzzy. There were some other part but we could not identify them. I want to know if the needle and seat and float assmebly is include in the kit. The sales person could not find a parts listings. I would prefer not to have to order the part. and find out that I need additional parts. Then I would have to make another order and pay for shipping again. Any help would be appreciated, Thanks. Dan

Read More
dan -
June 28, 2013
A:

Thanks for the response I was able to locate a parts list the overhaul kit. I have included the parts numbers and names of each individual part below.

692555 - GASKET-INTAKE

691242 - PIN-FLOAT HINGE

693749 - SPACER-CARBURETOR

691739 - PLUG-WELCH

398188 - KIT-NEEDLE/SEAT

693981 - GASKET-FLOAT BOWL

691321 - SEAL-THROTTLE SHAFT

693867 - SEAL-CHOKE/THROTTLE SHAFT

If you have further questions please let me know.
Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
June 28, 2013
See more answers
Q:

I need to convert my Amana slide in gas range from propane to natural gas, how is this done?

A:

Not everyone likes using propane for their appliances. like the Amana range that you have. Conversions should be done by qualified technicians. While waiting for an expert answer, I am providing a link with a similar question. Hope this helps. Thanks for your patience.

Read More
Anna T -
June 17, 2012
A:

Thank you for your question and I understand your concern.

I believe the only part needed is the broil burner spud. It will be stamped with a #52. It should have been left with the range. If not, the broil orifice #318640801 for Amana range model ARGS7650LL can be ordered from Sears Parts Direct.

I added two images below with the instruction for converting it to Nat or LP. Read over the instructions fully and have a good understanding of the procedure before proceeding to convert your range back to Natural gas.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
June 19, 2012
See more answers