Model #758630700 KENMORE Whole house Fan

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Sears whole house fan and shutter system model #758630700 758630700 Kenmore Sears whole house fan and shutter system

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore whole house fan and shutter system model 758630700. I am so sorry the house fan has not worked since you moved into your home. In this case, because most of the key components are no longer available for this unit, I recommend investing your money towards replacing it. 

I checked the availability of the switch, fan, timer, thermostat, motor, shutters and capacitor. Of these key components only the thermostat is still available. I have included the link below for you to view whole house fans currently available. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
January 07, 2015
A:

Thank you, Rachel. I had noticed that most of the parts for the fan were no longer available. And I recognize that ultimately it might need to be replaced. But my questions were more about how to test it to see what part might be bad, if there is a reset button, and what type of professional (is it an electrician or is it HVAC) we would need if we do need to replace or repair the fan. Regardless of what the end result might be, I want to try to figure out what could be wrong and see if it can be repaired, instead of jumping to replacement. Would you be able to tell me if there is a reset button to try, how I could test it to see what part might have failed, and whether it is an HVAC or electrical specialist that would be needed should we need to repair/replace it? Thank you.

Read More
LORI -
January 07, 2015
See more answers
Q:

By passed Firestat 4526-1393-000 on Sears Whole House Fan 758.630700.

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
January 26, 2012
A:

The fire stat was supposed to turn the fan off in case of a fire. I don't think it will hurt to operate the fan without a fire stat in the circuit. If a fire gets hot enough to melt the fire stat, the house will be pretty much burned up.

Read More
Jimmy K -
Sears Technician
January 27, 2012
See more answers
Q:

whole house fan

A:

I understand that you are having problems with your whole house fan. I have taken some time to research your question here on the Manage My Life website and I was able to locate a similar question to yours. I attached the link below for you to view while you are waiting on your response from an expert. I hope the link that I provided gets you one step closer to repairing your fan. Have a great day.

Read More
Alina F. -
July 30, 2011
A:

Some things that can cause your whole house fan to turn on and off are:

  • Defective on/off switch

  • Defective speed control

  • Defective motor

  • Defective wiring to one of these components.

Someone will need to trace the wiring through each of the components. If you are not comfortable doing this testing, you can go to Home Services and get a Sears technician to repair the fan.

Read More
Jimmy K -
Sears Technician
August 01, 2011
See more answers