Model #758144120 KENMORE Humidifier

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Humidifier Filters 758144120 Kenmore Humidifier

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore Humidifier model 758144120. I am so sorry you are having an issue with the filters. I will be happy to help you with this.

In this case, it sounds like you are missing a part. The filters shouldn’t be able to move freely in the tank. The filters should go into the filter holder that slides into tracks on the tank. The holder should sit on the filter float on the bottom of the tank. If either of these parts is missing the filter will not sit properly in the tank. I have included the link below for you to view the owner’s manual online. The filter installation is on page 8. 
 
I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
December 16, 2014
Q:

HUMIDIFIER

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
December 15, 2011
A:

Thank you for your question on the humidifier.

If both motors wiring go directly to the control board, it could be a control board problem.

If the motor will spin freely by hand it may not be the motor that is the problem.

We do not have available any wiring information on the humidifier. There should be a wiring diagram in the unit that would show which wire is hot and which one is neutral.

If the wires are black and white or if there is white identifier on the wire then it will be neutral.

I do however recommend that you do to service the motor or control yourself. I have to give this warning information for this product.

ANY ATTEMPT TO REPAIR THIS CONTROL ASSEMBLY OR MOTOR MAY CREATE A HAZARD UNLESS REPAIR IS DONE BY A QUALIFIED SERVICE TECHNICIAN. THIS ASSEMBLY IS FACTORY ALIGNED. REPAIR SERVICE IS AVAILABLE AT YOUR NEAREST SEARS STORE.

Sam A.

Read More
Sam A -
Sears Technician
December 18, 2011
See more answers
Q:

Is there a way I can lubricate the fan?

A:

Most of these small fan motors do not have a place to lubricate them. If there is a place, look for a small cap or plug that will be covering a hole. However, I suspect the noise is probably, a vibration noise. It could be that the motor or bracket just needs adjusting. If this was just serviced, you may want to check back with whoever serviced it. If you need more assistance, please resubmit your question with more details.

Read More
Scott D -
Sears Technician
January 07, 2010

Top Accessories