Model #75151 CRAFTSMAN Power Washer

  • Main Assembly
    3 Results
  • Accessories And Attachments
    3 Results
  • Pump Assembly
    3 Results
  • Pump Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

ac

A:

During this time of year I know how important it is to have a good working AC unit in the home so that you can keep your home nice and cool. While you are waiting for your expert answer, I suggest you add to the thread of this question and include the correct and full model number of your appliance so that the expert can provide you with a more detailed answer. I did manage to find a link in where you can enter your appliance model number and the owners manual will pop up in where you can find some great troubleshooting tips. I hope my link is useful.

Read More
Joseph P. -
July 18, 2011
A:

Thank you for your question.

I will assist you with your question. Air conditioners today are not made to drain all of the water out of the base. The condenser fan will sling water from the base onto the condenser to aid in cooling. If the water seems to be at a higher level than it did before I recommend checking the drain at the back of the unit. It might be plugged with debris. If the water is leaking into the house, I recommend checking the level of the unit. It should be at least a 1/4 inch lower in the back than the front.

I hope this is helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 19, 2011
A:

This is not a window unit. Its portable that you can move from room to room. Has not pan to empty

Read More
John Collins -
August 15, 2012
A:

Unit is Made by Delonghi, Model is Pingunio PAC CT90 portable that moves from room to room and you vent through a window with Dryer type hose.

Read More
John Collins -
August 15, 2012
A:

John Collins,

I am sorry you are having a problem with the room ac unit. I looked up the manual for this unit. According to the manual, this unit has a drain tank. The image below shows how to empty it. If you still have a leak, I recommend checking the installation of the ac. The link below will take you to the manual that has the instructions. If it is installed correctly, I suspect the drain is plugged or the catch pan is broken. You will need to take the unit apart to check these.
Please let me know if you need further assistance.
Mark T.

Read More
Mark T -
Sears Technician
August 19, 2012
See more answers
Q:

Kenmore AC model 580.75151. Reset code needed for tripped switch

A:

I know how helpful it is to have this information. I was able to find the owner's manual for your model. I attached the link below. Just copy and paste. I hope this is helpful. http://www.managemylife.com/mmh/owner_manuals/19807/KENMORE-Air-Conditioner-Room-(42)-L0522409?brand_name_search=580.75151+

Read More
Jackie S -
July 26, 2012
A:

Thank you for your question. There is a test switch and a reset switch on this cord. To rest the switch when it trips, just press the reset button. If it will not reset, the cord # 6411A20056K will need to be replaced. I hope this will help you.

Read More
Scott D -
Sears Technician
July 27, 2012
See more answers
Q:

How to install a window air conditioner in a basement wall

A:

Installing a Kenmore Window Air Conditioner properly can save you money. Managemylife.com is a great place to get installation instructions and owner manuals which would be beneficial to helping you with the installation questions you have. Please provide the model so the experts can better assist you in answering your specific questions. Click on reply with added information. I provided a link that may be helpful while your wait for an expert answer.

Read More
Anna T -
March 04, 2012
A:

model #75151

Read More
Michael -
March 04, 2012
A:

Thank you for your question. The window air conditioner that you have needs to be installed in a window for it to operate properly. Any other installation methods are not recommended by the manufacturer and will void the warranty if it still has one.

This particular model has a minimum clearance it must maintain around the top and sides of the cabinet with all hot air being able to be exhausted to the outside environment as well as a place for the drain. There is not going to be enough space in a wall to vent this appliance.

Read More
Andrew D -
Sears Technician
March 05, 2012
A:

I was planning on mounting the unit so that the side louvers would be inside the room (using inside air for intake of the condenser fan) and the only part being in the wall would be the rear of the unit so as to exhaust the hot air out and up through a 12" duct.

Read More
Michael -
March 05, 2012
A:

This model has louvers on the sides as well as the top and back. All of them would need to have unrestricted venting to the outside environment. If there was only rear venting to contend with, you would need to build a plenum for the rear end of the window ac, attach a collar with the duct work and run that to the outside which would end up taking up quite a bit of space. The side louvers not being vented would exhaust the hot air into the room, and be drafted back into the appliance causing it to malfunction or believe that the room is hotter than it actually is.

If you are trying to turn the basement into a conditioned area, my suggestion would be to have a duct free mini-split system installed. They are extremely popular in home additions, garages, basements and server rooms. At Sears, we do sell and install the Mitsubishi line of mini-splits which has been manufacturing very good mini-split systems for years. Not only would it look better and easier to install, they have a much higher efficiency over window air conditioners.

Read More
Andrew D -
Sears Technician
March 05, 2012
A:

What about Portable AC units such as this one? http://www.amazon.com/dp/B003ZAFSHW/ref=asc_df_B003ZAFSHW1925158?smid=A5D5QHQMB730E&tag=dealtmp698105-20&linkCode=asn&creative=395105&creativeASIN=B003ZAFSHW Seems like the mini-split units are over $1500. Can you send a link to one you recommend for a 500 sq ft space?

Read More
Michael -
March 05, 2012
A:

If the space is only 500 sq ft, then you really only need to have between a 10k BTU and 12k BTU room AC to properly cool the area. I do not have any direct experience with the brand provided in your link so I can not say whether that would be a good deal or not and there have been very limited reviews from what I can tell.

If you live in a region where it's not normal to have very warm weather like we do in the south, you might be able to get away with a 10k BTU room AC such as this one by Soleus. Soleus 10k BTU Room AC

If the room is long or has an odd shape to it, you may want to stick with the 12k BTU range.

Read More
Andrew D -
Sears Technician
March 05, 2012
See more answers