Model #75130 CRAFTSMAN Power Washer, Electric

  • Motor
    3 Results
  • Pump
    3 Results
  • Attachments
    3 Results
  • Accessories And Attachments
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore softener reads "1999 average daily usage" I clearly don't use that much. What is wrong with the softener? 625.75130

A:

You did not indicate if you have soft water or not. If you do not have soft water, you could have a water leak causing the softener to show regenerate tonight.
To check to see if you have a water leak, turn off all faucets inside and outside the house and then look at the display on the water softener to see if it shows water flow. If it shows water flow, then I suspect you have a water leak. If the display does not show any water flow through the water softener, I suspect the control board is faulty or failed drive motor or position switch. I recommend calling a service technician to diagnose the failure if you do not have any water leaks. You can also look at your main water meter and see if the meter is showing water flow too. Just make sure all the water faucets are turned off in the house and outside.

Read More
Joey S -
Sears Technician
March 17, 2015

Top Accessories