Model #747 PORTER CABLE Saw Sabre

  • Saw
    3 Results
Find part by diagram >

Question and Answers

Q:

Discharge Shoot 247.370341

A:

Thanks for the response, and for obtaining the model number. 

The discharge chute for this model is part number 731-07486. If you need the hardware and bracket, the bracket is 787-01779, the hinge pin is 747-0710A, and the torsion spring is 732-1014C. The screws for the bracket are part number 710-05073. 

I do not see any other options for the discharge chute other than what's notated above. If you need assistance with the torsion spring for the chute, there are some great YouTube videos that will show how to assemble it. 

I have linked some videos below:

Discharge Assembly

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 03, 2015
Q:

Please Need Outside measurements W x D x H so I can get correct size new oven RK747GJ1 Hotpoint Hotpoint built-in ovens,

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

 I do apologize due to the age of the product we no longer have the dimensions of the unit. You would need to measure the unit in order to get the correct dimensions. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

 

Read More
Natasha12 -
Sears Technician
August 03, 2015
Q:

Need plastic connector for end of wiring harness that attaches to motor FSE747GES1 Frigidaire Dryer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize it does not look like we sell the connectors by itself. The manufacture sells the complete harness and complete motor. You may be able to locate a connector that may work at a hardware store.

Also if it is apart of the motor you would need to find an alternative because the motor on your washer is no longer available due to the age of the product. 

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 16, 2015