Model #740 PORTER CABLE Saw Reciprocating

  • Saw
    3 Results
Find part by diagram >

Question and Answers

Q:

Door lock won't engage. RB740BH1WH Hotpoint Electric range

Q:

Oil leak on Craftsman riding mower 917-275282

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the oil leak. I know how frustrating that is. 

This will likely be the bottom PTO End oil seal. This is an indepth replacement as the oil pan will need to be removed. The engine will usually need to be pulled for this type of repair. 

I have linked the page where you can download the engine service manual below. Click on the link for the CV740 engine. The pan assembly is covered on page 65. The oil seal is part number 24-199-07-S. 

Service Manual Page

I hope thsi helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 11, 2015
Q:

How many CU FT is my Estate by Whirlpool Washer and Dryer set? TAWS750PQ0 Estate Residential washer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the capacity of your washer and dryer. 

I do apologize the manufacture no longer gives us the capacity of your washer and dryer due to the age of the product.  You would need to measure the unit yourself in order to determine the cubic feet.

This is a geometric method to calculate tub capacity based on the cylinder volume formula. Unfortunately, the value could be as much as 25% off from the manufacturer stated capacity.

 

Why? Because the tub is not exactly a cylinder. The edge where bottom connected to the wall is not at 90 degree angle but smooth and rounded. The water line is not clearly marked and the bottom is not always flat. Finally, an agitator also takes capacity away from the tub.

 

This method can be used as a crude estimate but we do not recommend using it for comparisson when shopping for a new washer.

 

Determine your washer tub capacity by taking two simple measurements:

 

 

 

1. Use the ruler to measure the depth of the tub (indicated by the red line on the diagram)

 

2. Now find the distance accross the tub, the diameter (the green line on the diagram). Note that some tubs are narrow on top. In this case make the measurements INSIDE the tub.

 

Solution:

 

 

Tub Depth:  in.   Tub Diameter:  in. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 02, 2015

Top Parts