Model #728 HOOVER Vacuum, Upright

  • Agitator
    3 Results
  • Cleaningtools
    3 Results
  • Handle
    3 Results
  • Hose
    3 Results
  • Mainbody
    3 Results
  • Motor Assembly, Hood
    3 Results
  • Outerbag
    3 Results
Find part by diagram >

Question and Answers

Q:

How many cubic feet are in my Kenmore 106.71294100 refrigerator? 10671294100 Kenmore Top mount refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
July 08, 2013
A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to know the size of your refrigerator especially when it comes time to replace it. I was unable to find any specifications for this particular model. However, I have included below, instructions on how to measure the cubic feet capacity of your model. I hope this will help.

1. Take everything out of your refrigerator. You do not want to have to work around storage containers and shelving.

2. Measure the width from right to left, making sure that you keep the tape level. Write the number down.

3. Measure the height, using one of the front edges so that you keep the tape plumb. Write the number down.

4. Measure the depth from a top inside corner to the front edge. Write the number down.

5. Multiply the three dimensions. If, for example, the height is 45 inches, the width is 31 inches, and the depth is 17 inches, you multiply 45 x 31 x 17, for a total of 23,715 cubic inches.

6. Divide the total by 1,728 -- the number of cubic inches in a cubic foot -- to determine the volume of your fridge in cubic feet, which is how most manufacturers represent the volume of their refrigerators. Here, 23,715 cubic inches equals 13.72 cubic feet.

If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Desirea -
Sears Technician
July 09, 2013
A:

Thank you. Made the calculation and have begun the process of searching for a replacement.

Read More
Michelle -
July 09, 2013
A:

~22 cu ft.

Read More
Robert -
November 19, 2013
A:

What is the Square footage of my Sear Refrigerator model 795.75554401

Read More
Stan -
June 24, 2015
See more answers
Q:

Mower Deck Fit/Compatibility GT3000 917275010

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the compatibility of the mower deck from Craftsman tractor 917275223 with tractor 917275010. I will be happy to help you with this. 

I have reviewed both tractor and there are several differences between them. To begin with, the deck on tractor 917275223 uses a Link Tension Relief Lever (key 112) that is not used on model 917275010. There are differences on the lift assembly also. The transaxles are also different but the suspension brackets that hang the deck under the mower are the same. This means the deck should attach the same however, how the blades are engaged may be different. We do not give advice on modifying a part to fit a different model since we cannot guarantee the part will function properly. The manufacturer replacement deck made for your model is still available. I have included the link below in case you would like to order it. (It is actually less expensive than the deck for the other model.)

If you want to pursue using the other deck with your model, I recommend contacting the manufacturer directly. Both tractors were made for Sears by Agri-Fab. Their contact number is 217-728-8388. I hope this information helps. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
May 23, 2015
Q:

Mower Deck Fit GT3000 917275010

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the compatibility of the mower deck from Craftsman tractor 917275223 with tractor 917275010. I will be happy to help you with this. 

I have reviewed both tractor and there are several differences between them. To begin with, the deck on tractor 917275223 uses a Link Tension Relief Lever (key 112) that is not used on model 917275010. There are differences on the lift assembly also. The transaxles are also different but the suspension brackets that hang the deck under the mower are the same. This means the deck should attach the same however, how the blades are engaged may be different. We do not give advice on modifying a part to fit a different model since we cannot guarantee the part will function properly. The manufacturer replacement deck made for your model is still available. I have included the link below in case you would like to order it. (It is actually less expensive than the deck for the other model.)

If you want to pursue using the other deck with your model, I recommend contacting the manufacturer directly. Both tractors were made for Sears by Agri-Fab. Their contact number is 217-728-8388. I hope this information helps. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
May 23, 2015

Top Parts