Model #72180524500 KENMORE Microwave/Hood Combo

  • Door Parts
    3 Results
  • Controller Parts
    3 Results
  • Oven Cavity Parts
    3 Results
  • Latch Board Parts
    3 Results
  • Interior Parts 1
    3 Results
  • Interior Parts 2
    3 Results
  • Installation Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Glass tray 72180524500 Kenmore Microwave/hood combo

Q:

I want to know how much it will cost to purchase a new microwave with this model & installation fee 72180524500 Kenmore Microwave/hood combo

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

In order to get unit prices you will need to contact Sears.com they will be able to give you that information. We only give technical advise. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 24, 2014
Q:

The 3 button on my Kenmore Microwave Model # 721.80524500 will constantly go off. It is like someone is pressing 3 over and over again. Also the clear button has begun going off, so for example if ...

A:

Microwaves are the best appliance to have but when it starts to have problems it can be really annoying. While you are waiting on an expert to answer your question, you can visit Sears Home Services website to set service with a Sears technician. Hope this helps!

Read More
Dezeray S -
September 05, 2011
A:

From your description, most likely there is a stuck button on the touchpad. However, this issue could be caused by the main control board or a loose ribbon connector. You can try resetting the unit by disconnecting it from the outlet or by switching off the designated circuit breaker for 20-30 minutes, then restore the power. If the reset doesn't work, one of the above components will need to be replaced. Something like this will require removing the cover to make some checks. We do not recommend that the customer remove the cover of their microwave due to safety reasons. Microwaves are not good do-it-yourself projects. Microwaves are inherently dangerous to service. Internal capacitors can retain a lethal electrical charge even when the microwave is unplugged. A microwave radiation leakage test must be performed on the unit following any repair. Service can be scheduled at the following link: Sears Home Services

Read More
Korinna S -
Sears Technician
September 06, 2011
See more answers

Top Parts