Model #72163654300 KENMORE Microwave/Hood Combo

  • Door
    3 Results
  • Control Panel
    3 Results
  • Oven Cavity
    3 Results
  • Latch Board
    3 Results
  • Interior 1
    3 Results
  • Interior 2
    3 Results
  • Installation
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore #721.63654300 dimensions

A:

I know how important it is to have as much useful information about your microwave as possible. I have done some research and have located and provided below a link that may help you towards your issue,while you are waiting for a detailed reply from an expert. Hope this helps!

Read More
Priscilla V -
July 25, 2012
A:

Thanks Priscilla, but I'm really looking for the outside dimensions so that it will fit the same as the old microwave. You would think they would be listed in the manual, but I couldn't find them.

Read More
Anonymous -
July 25, 2012
A:

Thank you for your question. I can understand wanting your microwaves specifications so you can replace it.

I have given you the dimensions below.

Dimensions: Width: 29 15/16 (Inches). Height: 16 7/16. Depth: 16 1/8

Read More
Bobby B -
Sears Technician
July 26, 2012
See more answers
Q:

We have a Kenmore OTR Microwave. Model # 721.63654300.The frame has broken on the microwave door. I have the new frame, don't know how to change out the door.

A:

I am sorry you are experiencing difficulties with your Microwave. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage and a microwave shielding leakage test must be performed using a survey meter after any microwave service. I strongly suggest that you have this repair handled only by a qualified service technician. I have provided a link To Sears Home Services if you decide to schedule service. If you think it may be cost effective to just replace the unit, I have also provided a link to the Microwave section of Sears.com to price out what a replacement would cost.

Read More
Priscilla V -
November 22, 2011
A:

Pvalde2 is correct about the dangers of trying to repair that microwave yourself. We recommend that you have a service technician diagnose and repair that microwave door failure. Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as replacing door frames, can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Lyle W -
Sears Technician
November 23, 2011
See more answers
Q:

Why is my microwave not working after changing the light bulb?

A:

I do not clearly understand the question. If you're indicating that the microwave is dead after replacing a light bulb, the line fuse is likely bad due to a short in the light circuit.

There is no reset other than checking and resetting the circuit breaker dedicated for the power outlet that the microwave is plugged into.

I recommend calling a service technician to diagnose and repair your microwave. I do not recommend attempting to check and replace the fuse yourself. Microwaves inherently store 10,000 volts even when the microwave is unplugged which is enough voltage to cause serious harm or it can even be fatal. Do not attempt to repair it your self.

Read More
Joey S -
Sears Technician
September 29, 2009

Top Parts