Model #7131 LANDS END Furniture

  • Ottoman
    3 Results
Find part by diagram >

Question and Answers

Q:

how do I replace the claim shift on the kenmore 795.71302012 refrigerator 79571302012 Kenmore Refrigerator

A:

Thanks for contacting manage my life about your refrigerator model 790.7131… I will be glad to assist you. If I understand you correctly you want to replace the door cam at hinges. I have attached images that will help you. If you need additional help reply with added details and I will be happy to respond. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Ron H.

NOTE: you must view all images from the Managemylife.com web site, click this link to move to MML.  

 

Read More
Ron H -
Sears Technician
October 21, 2013
A:

I have model # 795.71302.12 French door refrigerator and the door stopper on the bottom of the door broke and the door cam at the top of the door fell off. I saw the pictures on replacing the door stopper but I need to know how to replace the upper cam closer.

Read More
Millie -
December 02, 2013
A:

Hello Millie, if I am understanding you correctly the following post will help you with this repair. <a href="http://www.managemylife.com/mmh/questions/331320-lg-refrigerator-camshaft-replacement " target="_blank"> Question 366201</a> If for any reason you are unable to open the attachment or view it . I would suggest that you post your questionj on the Managemylife.com site. Ron H.

Read More
Ron H -
Sears Technician
December 02, 2013
See more answers
Q:

Gas stove will not light

A:

I understand the Kenmore gas range is not coming on. Does that mean the oven is not coming on either? To get the best possible answer please submit more information that may be helpful to the experts by clicking on reply to continue the thread. The links below may be helpful while waiting. Thanks.

Read More
Anna T -
May 30, 2012
A:

burners are lighting, it is just the oven that will not light

Read More
Gordy -
May 31, 2012
A:

Thank you for your question and I understand your concern.

Your oven may not be lighting because of a broken or weak glow bar igniter. Open the broiler drawer and then turn the oven on to bake. Look towards the back of the bake burner to see if the oven igniter is glowing red or not. If it's glowing red, the igniter too weak to cause the oven gas valve to open. Replace the igniter.

If the igniter is not glowing, the igniter could be broken or the electronic oven control or gas valve is faulty. The oven igniter must be supplied with 120 volts or it will not glow.

If the igniter does not glow, disconnect the power cord from the power source and then remove and disconnect the igniter. The igniter can be tested for continuity with an Ohm meter. If it does not measure continuity, replace the igniter. I added a YouTube video showing how to test the igniter.

The oven safety valve can also be disconnected and tested for continuity. If the oven safety/gas valve measures resistance, the electronic oven control is likely faulty.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
May 31, 2012
See more answers
Q:

kenmore gas rang front right burner won't light

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
January 03, 2012
A:

my model no is :79071313708

Read More
May -
January 03, 2012
A:

Your details point to a failed ignition switch on that right front burner control valve. The burner switches and the wiring harness normally come as one parts assembly for that range. The model number that you provided seems to be for an electric range. I recommend that you recheck that model number.

With the correct model number, you can order the burner switch replacement part from the Sears PartsDirect website.

Unplug the range and shut off the gas supply if you are going to replace the burner switch yourself. If you need more help with repair, reply with an updated model number and additional details.

If you get to a point where you need to have a service technician examine the refrigerator and fix this problem, you can schedule one through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 05, 2012
A:

Thank you very much. My model No: 79071313708 Could you help me check what part I should buy and how to replace the part?

Read More
May -
January 05, 2012
See more answers