Model #7108 LANDS END Furniture

  • Sideboard
    3 Results
Find part by diagram >

Question and Answers

Q:

Refrigerator Model# 795.7108

A:

Appliance error codes can be confusing.  While you are waiting for an expert to respond, I have added a helpful link (click here) that may provide information to assist you with your question.

Read More
Yadira B -
July 11, 2013
A:

Thank you for the information and the helpful link! I called in to get a service call and Elija said he couldn't get me a service date until 7-19-13... Sears expects people to wait over a week for a service appt, that's ridiculous and unacceptable. I'm taking my business else where and this will be the last Sears Kenmore product I ever buy. After this experience I have nothing good to say about Sears and their products!

Read More
SANDRA NELSON -
July 11, 2013
A:

Thanks for contacting manage my life about your refrigerator model 7957108…., I will be glad to assist you. The code ER CO is a communication error between the main board and the display; this could be connections, or board failures. I strongly recommend calling for a technician to come diagnose the exact cause of this code. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
July 12, 2013
See more answers
Q:

Water and Ice not dispensing

A:

I'm happy to help you.... You've done some good trouble shooting steps. When you turned of the power, was it at least for 20 minutes? I have located a link with a situation that is very similar to yours. Within this link is another link that I would like you to explore. I believe both offer good, sound advise. Keep in mind that you will be hearing from an expert within the next two business days if not sooner. I hope this helps you and have a nice morning

Read More
Henry -
October 25, 2012
A:

Thank you for your question. I know it can be disappointing when the dispenser stops working. This could be a problem with the switch or the control board. Press the pad in slowly and listen for a clicking sound. If you do not hear this sound, the switch may have failed. If you do hear the click, it could lead to a faulty board. Some voltage checks will need to be made to determine for sure. A technician may be needed to make these checks. I�m attaching some pictures with instructions to access the dispenser, to check the switch. Be sure to disconnect the power first. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
October 26, 2012
See more answers
Q:

How do I raise the temperature for my Kenmore Elite Trio fridge.

A:

Keeping the refrigerator and proper temperatures is important. I did some research but did not find information on how to raise the temperature. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that call goes well with the refrigerator.

Read More
Marc -
September 05, 2012
A:

Hi,

Thank you for your question. It is concerning when the refrigerator is not functioning correctly.

The book did not explain that after the lowest setting is reached the display will cycle to the highest setting. You will see, try the refrigerator and it will work.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.

Read More
Bill__W -
Sears Technician
September 06, 2012
See more answers